Rex 15W SES(E14) Oven Lamp Assembly for RKK651105W Stock Number: ES611709
Genuine spare part for select models of Zanussi, Electrolux and AEG cookers
Manufactured by Zanussi
(This part fits select Rex models)
Will this part fit my Appliance?
Check this part fits your appliance
15W SES(E14) Oven Lamp Assembly
If the lamp in your oven has burnt out and you can’t see in your cooker anymore, don't worry as eSpares are here to help. Don't put up with cooking in the dark a moment longer - get yourself that replacement lamp you've been meaning to for a while. You will finally be able to see what you’re cooking again!
Specification:
- Wattage: 15W
- Cap: SES(E14)
- Voltage: 240V
- Includes lamp cover
Genuine spare part for select models of Zanussi, Electrolux and AEG cookers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
4 Questions and 4 Answers
The oven is a Zanussi model ZOB33OX
-
Dean at eSpares says...
This lamp holder pushes into the cavity and clips spring out to hold it in place. To remove it you will have to disconnect and remove the oven and push the clips flat to enable them to be withdrawn through the oven wall as they can be tight to remove.
The Zanussi manual for the ZOB551X states a choice of 15W/25W for the bulb. I have always found the oven to be too dark to see much with a 15W bulb fitted so wanted to fit a 25W, (yes the lens is clean! ;-). I tried to fit a "universal" E24 25W bulb but it is too long by a long way at 57mm. I couldn't even get the lens to reach the thread so guess it is a very low level system. Now I'm finding it difficult to source a smaller bulb in 25W as I don't really know how to describe what I'm looking for. Can you give me the correct description of a 25W bulb which will fit?
-
Chris at eSpares says...
Try Stock Number: ES187895 as this looks identical other than it being a 25 watt bulb.
Firenzi FSF 650 SS
-
Chris at eSpares says...
This lamp holder pushes into the cavity and clips spring out to hold it in place. To remove it you will have to disconnect and remove the oven and push the clips flat to enable them to be withdrawn through the oven wall.
-
eSparesToby at eSpares says...
Unfortunately not, this is just the lamp holder.
Will this part fit my appliance?
Check Now
