Washing Machine PolyVee Drive Belt 1196J5 - 1196J5PJE Stock Number: ES562228
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Poly-Vee Drive Belt - 1196J5PJE
If the drum does not spin at the desired speed it may lead to your clothes being left damp at the end of each cycle. This may be caused by a worn out drive belt. eSpares could soon solve this problem for you and get your washer drum spinning correctly again, so you can enjoy clean and fresh clothes again.
- Type: Poly-Vee
- Length: 1196mm
- Type of ribs: J
- Number of ribs: 5
- Elasticity: PJE
Genuine spare part suitable for select models of AEG, Electrolux and Zanussi washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
2 Questions and 2 Answers
I took the top off but the back looks to complex to get off- Can I access from the base by lying it on its side?
Chris at eSpares says...
You may be able by leaning the machine forward to drop the belt over the motor pulley and feed it around the drum pulley turning to lead it on. To split the cabinet remove the top and there are two screws hidden behind plastic plugs in the middle. Remove these plus two from the side panels at the top on left and right. then remove 2/3 screws bottom back and unhook the valves to allow the rear half to pull away leaving the drum fixed to the front and base.
Can you tell me how I get access to the drum of this machine to replace the drive belt?
eSparesMalindi at eSpares says...
Unfortunately we do not have a guide on this at the moment, hopefully we will do in the near future. We cannot give out technical advice, so all I can suggest is contacting an engineer.