Freezer Drawer Front Cover - 180 x 385mm Stock Number: ES555359
Will this part fit my Appliance?
Freezer Drawer Front Cover
If you have cracked a drawer flap in your freezer, it could lead to the drawer cover becoming weaker over time. This replacement drawer cover from eSpares could soon be easily fitted in your freezer, to help restore confidence that your food is being kept in a safe and secure manner.
- Type: Drawer front cover (Not a pull-down flap)
- Colour: Clear
- Dimensions: 180 x 385mm
Please Note: The freezer drawer that this front cover is suitable for depends on what model you have. It is possible that this could fit the top, middle or bottom freezer drawer - depending on your model. We recommend that you check the measurements stated below.
Genuine spare part suitable for select models of Beko fridge freezers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
4 Questions and 5 Answers
- Take the drawer out of the freezer for an hour or two - when it is cold it is more brittle? As the other poster mentioned, gently lever the drawer away from the front where the round pegs are - they are tapered front to back as well so it is easier to press the replacement front on - so ease the rearward part of the peg out first?
- I had to ease it off with a small screw-driver levering the old drawer off under the round location holes. but you will have to be careful not to damage the drawer. I found it best to start at the top.
How wide is this drawer front? 1 Answer
Hi How wide is this drawer front Im after one for my CA5411FF. Cheers
eSparesToby at eSpares says...
This is the correct part for you, your model number is listed as compatible with this part.
Does this fit model TZDA629F 1 Answer
Rory at eSpares says...
Hi Reader, the cover you're after is this one: http://www.espares.co.uk/part/fridges-and-freezers/beko/p/1084/927/0/0/555339/chiller-cover.html