Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Miele Dishwasher Micro Filter Stock Number: ES552625

3.6 out of 5 3.6 out of 5 (22 Reviews)

Miele Dishwasher Micro Filter - ES552625
View video

3.6 out of 5 3.6 out of 5 (22 Reviews)

Genuine Miele spare part for select dishwashers

Read more

Manufactured by Miele

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Dishwasher Micro Filter

A damaged or clogged filter could be the cause of food waste building up in your dishwasher, which could block the drainage channels. With this replacement filter from eSpares, you could soon solve the problem and help protect the internal systems of your dishwasher.

Genuine spare part for select models of Miele dishwashers.

Please check the list of appliances prior to ordering to make sure this filter will fit your dishwasher.

This is Miele Spares reference: 4011464

Write a review

Here’s what other people are saying about Miele Dishwasher Micro Filter.

(22 reviews)

3.6 out of 5

Ease of fitting 2 out of 5
Quality 4 out of 5
Value 2 out of 5
  • Ireland.
    4.0 out of 5

    Best way to fit

    To refit the part - Rather than heat the handle which expands it, put it in the freezer. Put the narrow end (the top) of the filter part in very hot water which expands it. (not the other way around). The the filter does not need to be in place IN the dishwasher as it makes it harder to put pressure on the parts to snap them together. Take your hot filter part and stand it up on a flat surface, put the flat metal mesh over it (it should balance on top) then your cold handle part pops in very easily if it is lined up correctly. Hope this helps. I had no luck by heating the handle and trying to push it down inside the dishwasher as per suggestion below.

    Ease of fitting 3.0 out of 5
    Quality 3.0 out of 5
    Value 3.0 out of 5
  • Maidenhead
    5.0 out of 5

    STOP : this is how to fit it!

    I'm an aircraft engineer of 27 years and it had me stumped until I read some of the reviews below. First remove the old filter as best you can, screwdriver working it off is best. Fill a sink with really hot water and put JUST the handle side in to soften it slightly. Install the filter into the recess of the dishwasher with the key way notch at the 4 o clock position, as you look into the dishwasher. It should sit down and fit really well. Rotate the filter in position clockwise, until about the 5 o clock position. This should then lock it in its final fitment position. Place the mesh in position over the filter, so it is snuggly over the filter. Take the handle from he hot water, try to align the key way and press down real firmly. The handle should then snap into place, sometimes with a couple of clicks. Done. Hope this helps. Luckily, my old micro filter lasted twenty years, so this one will probably outlast the dishwasher.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 2.0 out of 5
  • Dorset
    4.0 out of 5

    Great service, overpriced part, tricky to fit.

    Great service from espares. Found the right part pretty easily and delivery was very prompt. However, as others have pointed out, the filter seems very expensive for what is simply plastic and some fine mesh. And it was not easy to fit. Thanks so much to the other reviewers for their advice. It was relatively easy to get the old filter off but I struggled for a while to fit the new one back on. Eventually I resorted to chilling one part (the handle seemed the best one) and heating the filter in very hot water. This worked well in the end. So: great service, overpriced part, very tricky to fit but got there in the end.

    Ease of fitting 1.0 out of 5
    Quality 4.0 out of 5
    Value 2.0 out of 5
See all reviews
Ask a Question

1 Question and 1 Answer

I cannot get the old filter off to replace it and am afraid of breaking the entire assembly- do you have any tips for doing this? cheers

By Samantha - Australia - 23 March 2015
  • Chris from eSpares
    Chris at eSpares says...

    We have no information on this but it looks like it may be a push fit. If you have a replacement you could either try and soften the plastic by placing in warm water before trying to remove. Or carefully cut off the damaged one using a small hacksaw and push the new parts together.

Answer this question
Order within 16:07:22 for UK Next Day Delivery