Get The App From Play Store!

Skip to main content

Whirlpool Fridge Freezer Control PCB Stock Number: ES547812

Genuine spare part suitable for select models of Whirlpool fridge freezers

Read more

Manufactured by Whirlpool

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Fridge Freezer Control PCB

If your refrigerator is acting up and not responding to the controls, you may well have a faulty control board. 

The module is considered the “brain” and controls key functions within the fridge, such as the compressor and fan. A defective board can stop your appliance from cooling correctly and as a result, make your foods go off. Breathe new life into your fridge freezer and be on your way to keeping your favourite foods cool and fresher for longer. 

Genuine spare part suitable for select models of Whirlpool fridge freezers.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Ask a Question

11 Questions and 12 Answers

By throboboy - newport - 26 February 2009
  • he i had exact same problem 4 weeks ago.everytime i turned on the switch to my american fridge freezer the electric cut out all the sockets in the house, comet fixed it for a set price and replaced the heating element and solved the problem. now i have the pcb front panel that is ticking and flashing non stop. but the fridge freezer is now working By Anonymous - elstree - 22 September 2010
  • Rory from eSpares
    Rory at eSpares says...

    Hi Throboboy, I'm afraid that you'll need to get in touch with an electrician, I'm not qualified to give you advice on this!

Answer this question
By lisa - Cardiff - 17 December 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    You would need to check the control PCB connections to the display, look for any signs of damage before suspecting anything else.

Answer this question

Hi, I have a whirlpool s20b tss21-a/g and I need to replace the front Pcb but I don't know how to remove the front panel. I slide off the bottom and I don't see any screws, just two small holes at the low left and right side. Can you tell me how to remove the front panel so I can access to the Pcb and replace it? Thank you Vito

By Vito Cottimo - Italy - 25 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    We believe the cover is clipped over a surround fitted on the door. Carefully slide a blunt knife or credit care under the edge to help of the mounting clips.

Answer this question

I have no model number but have number on the circuit board TP600000/AA Also on the mountain case ITW ISPRACONTROLS 461950243503

By BELL - Kent - 12 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    There should be a 12 digit production number on a lable on the fridge wall (may be behind the containers) that starts 85. If it is 858615415010 then Stock Number: ES950837 should be the correct module.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Fridge Freezer Control PCB

£150.07
(inc. VAT)
£150.07