Hoover Fridge Thermostat Probe - 1695mm for HVNP 3885 Stock Number: ES547168
Will this part fit my Appliance?
Check this part fits your appliance
Fridge Thermostat Probe
If you need a new thermostat probe for your fridge, you have come to the right website! This handy and affordable replacement thermostat probe for your refridge freezer is sure to get it working like brand new again in next to no time.
Specification:
- Length: 1695mm
This is a genuine spare part for select Candy and Hoover refrigerators.
Before ordering please check the model fit list to ensure compatibility with your appliance.
4 Questions and 6 Answers
Please can u tell me what is wrong with my fridgefrezzer model number is hca390ffk hoover.my frezzer is fine but the fridge is icing up,any ideas please.
-
Chris at eSpares says...
This sensor is likely to have been foamed into the insulation behind the wet wall during manufacture and it may not be possible to replace this.
- I find in my fridge the Hoover Fridge Thermostat Probe for FRHCN4584 you can tell me where it is? thank you
-
Rory at eSpares says...
Hi Evans, there is one probe per pack. Check out our advice centre article for tips on how to solve your problem: http://www.espares.co.uk/advice/fridges-and-freezers/a/2/280/common-fridge-and-freezer-faults.html?k=#defrosting
compresser is not cutting out and even though I have turned it right down fridge is freezing everything. would replacing the fridge thermostat probe solve the problem
-
Chris at eSpares says...
This is an electronically controlled fridge and before suspecting the sensor for more information we suggest you check our diagnosis video: http://www.espares.co.uk/advice/2/2113/how-to-diagnose-a-fault-with-a-frost-free-fridge-freezer
I'm having a problem with my HCA390FFK continuously running until the freezer is frosted up, then defrosting itself, then running again until it's frosted up. Is this thermostat probe the one I can see going in to the back of the freezer?
-
eSparesMalindi at eSpares says...
We cannot look up your appliance without the full model and serial numbers. Please contact us again with your full model details and then hopefully we can help. But if you are unsure what the problem is with your appliance, please seek technical advice 1st.
Want to gain access to fit the stat to a Hoover HCA 300 FK, but cannot see how the cover is removed.
-
Rory at eSpares says...
Hi Lowi Your best bet here is to ask a friend or relative for a hand. Two heads are better than one! It shouldn't be too difficult, however I'm not technically trained so I couldn't tell you!
Will this part fit my appliance?
Check Now
