Get The App From Play Store!

Skip to main content

Oven Door Seal Stock Number: ES545679

Genuine spare part for select models of Stoves, Belling, and Diplomat ovens

Read more

Manufactured by Stoves

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Oven Door Seal

If you are finding that heat is escaping from your oven, it sounds like you need to replace the door seal. If you have a faulty door seal, the heat will escape - which could lead to your food not being cooked correctly, or the control panel and its buttons being damaged.

eSpares has this replacement door seal, that could soon be added to the door of your oven to ensure that the heat remains where it should be - inside the oven, cooking your tasty meals!

Specification:

  • Length: 2m
  • 3-Sided
  • Please note: On some models, this seal can be used on both the main oven & top oven. When used on the top oven you would have to cut to length using the old seal as a guild. Therefore this door seal may require some care and skill to fit.

Genuine spare part for select models of Stoves, Belling, and Diplomat ovens.      

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Ask a Question

13 Questions and 17 Answers

By Anonymous - BN8 6PW - 05 December 2014
  • Chris from eSpares
    Chris at eSpares says...

    We do not have information on this but looking at the seal profile it suggests it is fitted into a channel around the cavity. We think you should be able to just pull the old seal out and lubricate the new seal with liquid soap and push into the gap with the help of an old credit card. If this does not work you may have to loosen or remove the surround from the cavity.

  • stoves 600g built-in gas oven / grill. model no 444445107. serial no 71124842 By mr m dagnall - coal aston dronfield s183ap - 19 October 2015
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

our model no is 058585102 and the seal does not go over the chrome bar at the top of the door surround letting hot oven air out is this meant to be like this ? or will a new seal completely surround the aperture to the door??

By peter - Stratford upon Avon - 03 December 2010
  • Peter is right the 058585102 has a gap at the top about 4 inches across in the middle. I need to replace the seal on such an oven and wondered if it was actually missing from the top middle bit but after reading Peters above I think not. Just to clarify the Stoves 058585102 EFA600H has a four sided seal. Full left and right and bottom. The top also has the seal but in the middle top there is a chrome bar with no seal aperture its about 4 inches long. Hot air does escape when the oven is on. Cant remember whether this is right or not. By Varkanoid - Wakefield - 04 May 2013
  • Rory from eSpares
    Rory at eSpares says...

    Hi peter, this seal is roughly 2m long. It's three sided - it's designed to fit round the top and the two sides of the oven. It shouldn't be fitted round the bottom rather than the top; as you know heat rises so will escape if the top isn't sealed.

Answer this question

Is it easy to fit?

By CluelessPete - - 06 August 2009
  • This item consists of one length of door seal and is idiot proof to fit as you just pull out the old and push in the new By tunnelvision - West London - 16 March 2010
  • eSparesToby from eSpares
    eSparesToby at eSpares says...

    Yes door seals are very simple to fit, you just have to press them into place and at most clip them in the corners.

Answer this question
By Amber Baker - Exeter - 07 August 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    We do not have information on this but looking at the seal profile it suggests it is fitted into a channel around the cavity. We think you should be able to just pull the old seal out and lubricate the new seal with liquid soap and push into the gap with the help of an old credit card. If this does not work you may have to loosen or remove the surround from the cavity.

Answer this question

We have the Stoves 720EF 444445124 Double oven, is this long enough to replace both seals?

By R - - 05 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    No, this is for the main oven door only.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Oven Door Seal

£49.65
(inc. VAT)
£49.65