Indesit Washing Machine Door Seal for WIL143SUK Stock Number: ES544297
Genuine spare part for select Hotpoint and Indesit washing machines
Manufactured by Hotpoint
(This part fits select Indesit models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Door Seal
If you are noticing that there is water coming from the door of your washing machine during or after the wash cycle, it could be due to a faulty door seal. With this replacement door seal from eSpares, you can get back to having the confidence in putting the washing on and not ending up with flooded floor!
Spare part for select models of Hotpoint, Indesit, and Scholtes washing machines.
Please check the list of suitable models to ensure that this is the correct part for your appliance.
Please note this part does not include the outer and inner clamp.
10 Questions and 11 Answers
Our inner retaining spring band has warped so needs replaced. Just trying to source a replacement part!
-
Chris at eSpares says...
The inner clamp band to the drum for your machine is Stock Number: ES657529 and is not supplied with the door seal. The outer clamp band is Stock Number: ES831870
- Thanks Chris, Tur clamp band on the outside of the door seal is ok, but the inner spring-like band has come off and is warped from rattling around indside the drum and no longer holds the seal in place. This is the bit we'd need to replace (together with the actual door seal). Do you think they're easy to find as I can't see one available from ESpares. Thank you.
-
Chris at eSpares says...
The clamp band for your machine is Stock Number: ES657529 and is not supplied with the door seal.
- There are two small drain holes, to prevent sitting water in the rubber ring. If you position, the moulded rubber part at the top, then the drain holes will be at the bottom, where they are supposed to be
- yes
Watched your video to change rubber seal but cannot get front panel off as is welded not screwed. Can you help please
-
Chris at eSpares says...
For information on your repair on a similar machine see our video:How to replace an Indesit washing machine door seal: www.espares.co.uk/advice/7/2305/
I have an Integrated Indesit Washing Machine. It would be really hard to take the machine out of the kitchen unit to remove any top or front -can I replace the seal by just removing the door? Also- do I need to also buy the circular fixings or can I reuse the old ones?
-
Chris at eSpares says...
For information on this type of repair see our video: How to replace an Indesit washing machine door seal. http://www.espares.co.uk/advice/7/2305
but the old seal does not have the rubber protrusion shown on the inner edge of the picture of this seal on the website. Did Oddjob have any problems after fitting the seal. the back face of the old seal is flat whereas the new one is ribbed.
-
Chris at eSpares says...
As long as the seal fits and the drain holes are in the correct place then the extra protrusion is not a problem. Manufacturers will sometimes change a part in production and this lip is designed to help washing to keep away from the drum edge and nost rub the seal on spin.
Will this part fit my appliance?
Check Now
