Get The App From Play Store!

Skip to main content

Pressure Washer Water Inlet Pipe/Cover Stock Number: ES537845

Plastic L shaped inlet pipe for select Karcher pressure washers

Read more

Manufactured by Karcher

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Pressure Washer Water Inlet Pipe/Cover

If you have a leaking pressure washer, let eSpares help! The main causes could point to the water outlet connection. eSpares has the spare cover right here, that once replaced will allow your pressure washer to get back to full power, so that once again you can give the car the showroom treatment!

Please Note: Check the image below, if the part you need is positioned underneath the control head, then this is the correct part. If it is positioned to the left or above the control head, then this is not correct part you require.

Elbow Joint

Please Note: This does not include the O Ring - please see associated products.

Prior to ordering, please check the list of models to ensure this is the right part for you.

Karcher spares reference: 4.063-000.0

4 Questions and 6 Answers

By Whitehawk - - 13 July 2009
  • I was looking for a Torx screwdriver too, with a head that fits the type of screws in my pressure washer. Most screwdrivers have a slot head, like this "-" or a "+" phillips type head. Torx has a head more like " * ", like a star. Now, I've discovered that the required tool is most commonly sold as an Alan Key (format) not as a typical screwdriver. You can buy a set of various sizes in good tool stores. By Decklo - Maidenhead - 06 October 2009
  • It is a special scrwdriver with a unique head. By timfastcar - Suffolk - 21 September 2009
Answer this question
By GirlPower - - 16 June 2009
  • Watch the video on the espares site!! By Happyuser01 - Cheshire - 11 May 2010
  • The should be no problem providing you have a Torx 15 screwwdriver By Yecal - Inverness - 01 July 2009
Answer this question
By John Millett - Derby - 20 July 2016
  • eSpares Staff  from eSpares
    eSpares Staff at eSpares says...

    Hi John The seal is not sold as a separate part by Karcher. If required you would need to purchase Water Inlet Pipe/Cover which comes with the seal attached.

Answer this question

have bought a new inlet connection which came with a new valve but on video it doesn't mention sealant

By cp - cheshire UK - 25 April 2015
  • Chris from eSpares
    Chris at eSpares says...

    We think the tube is a silicone lubricant to be applied to the O ring on the elbow slips easily and seals correctly .

Answer this question

Will this part fit my appliance?

Check Now