Bosch Dishwasher Lower Door Seal for SGU43A82SK/01 Stock Number: ES502822
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Lower Door Seal
If you are noticing that there is water coming from the door of your dishwasher during or after the cycle, it could be due to a faulty door seal. With this replacement door seal from eSpares, you can get back to having the confidence that when you put the dishes in to clean, you will not end up with a flooded floor at the end!
Specification:
- Length: 555mm
- Width: 70mm
Genuine spare part for select Bosch, Neff, and Siemens dishwashers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
We've received some fantastic customer feedback and fitting tips on this door seal. Make sure to scroll through the product reviews for GT767's fitting advice and many more helpful hints.
8 Questions and 9 Answers
Hi, I watched your video for replacing the lower door seal on a Bosch SGS4012GB/14 dishwasher but can't see how to remove the top panel. Are there clips or something else holding the top on? 3 Answers
The lower door seal arrived from espares today. Order number 4944265
- I've just successfully changed the Lower Door Seal on our dishwasher - getting the top off was the most challenging part! You should also make careful notes of the screw types – fine threaded to go into metal and coarse threaded (like wood screws) to go into plastic. Seems like the fixings for the top have changed over the years. Our machine is from 2008 and has two 'wood' screws at the front and one (of three possible) 'metal' screws at the back – you need to undo all of these first. At the front the top has two big plastic blocks with locking lugs – you can see the lugs down little tunnels facing you. Use a screwdriver to push each lug back which will allow you to pull the top up at the front. At the back the top has two lugs sticking through the rear metal panel. Tug the top forwards to release it from these lugs. Hope this works for you
- Close the door. Pull the clip down slightly and lever out sideways
-
Chris at eSpares says...
The lid on most Bosch dishwashers slides and locks in place. We think that at the back there is a clip either side moulded into the top that needs to be released to prevent locking the lid in place.
I have removed the lower door seal but the grey tray it is attached to appears to be distorted 1 Answer
should the lower grey tray have a convex bend along there lip running left to right, this is the lip that the seal is attached to. It bends outwards slightly towards the middle. I have photos which I can send showing the problem.
-
eSpares Staff at eSpares says...
The only time it needs to be replaced is because the dishwasher is leaking from the seal or the door does not close correctly due to the tray catching.
Not able to remove door of Bosch dishwasher as it has a white plastic block holding the door hinges, this is not the same as the video. How do you remove the block without breaking it. 1 Answer
Model SGS4332GB17
-
Chris at eSpares says...
The covers Stock Number: ES731804 have clips that hold them in place and we think they have to be twisted to unhook and remove them.
The video for this product only shows the top seal being replaced where do I go to see the procedure for the bottom seal? 1 Answer
-
Chris at eSpares says...
We have now changed the video attached to this part to the correct one showing this repair.
-
Chris at eSpares says...
We are sorry but the video attached to the part is the closest video we have for this repair.
Will this part fit my appliance?
Check Now
