Electrolux Dishwasher Heater Element - 2100W for ESF6133 Stock Number: ES486432
Genuine spare part for select models of AEG, Electrolux and Whirlpool dishwashers
Manufactured by AEG
(This part fits select Electrolux models)
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Heater Element - 2100W
If you have noticed the water in your dishwasher not the usual warm temperature, then there could be a problem with the heating element. With this replacement heater from eSpares, you could soon restore the water temperature and get great cleaning results with sparkling dishes and cutlery on every wash.
Specification:
- Diameter: 40mm
- 2100 Watts
- Type: Flow-thru
- Voltage: 230 (Volts)
Genuine spare part for select models of AEG, Electrolux and Whirlpool dishwashers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
Please note: This part is PNC number dependent, please contact our call centre with this information so we can ensure that this is the correct element for your dishwasher.
3 Questions and 3 Answers
My AEG Favorit 40630 dishwasher is sticking on the wash cycle. When I switch it off and open it the water inside is cold so I suspect it is the heating element that is the issue. Could it be anything else? 1 Answer
-
Chris at eSpares says...
For information on this problem see our diagnosis video: How to Diagnose Dishwasher leaking and heating problems. http://www.espares.co.uk/advice/3/2083
my zanussi zsf6126 does everything apart from dry the dishes ? why? heater is heating water to about 80 c 1 Answer
-
Chris at eSpares says...
If the water is heating to 80c then the heater is clearly working. It is possible the thermostat should allow the water to heat to 95c so try replacing the thermostat.
I have tried testing my old heater (which I suspect is faulty) with a multimeter across the heating element terminals. I believe that an open circuit here means that the element is broken - is this correct?
-
Rory at eSpares says...
Hi there, an open circuit indicated on the multimeter would indeed suggest that the element is faulty.
Will this part fit my appliance?
Check Now
