Tricity Bendix Lower Tumble Dryer Filter Assembly Stock Number: ES485502
Genuine spare part for select models of AEG, Arthur Martin, Faure, Electrolux, Tricity Bendix, Zanussi, Zanker and Zoppas tumble dryers
Manufactured by Electrolux
(This part fits select Tricity Bendix models)
Will this part fit my Appliance?
Check this part fits your appliance
Lower Tumble Dryer Filter Assembly
If your tumble dryer filter is clogged beyond cleaning, or has split, this replacement is perfect for you. This is the lower curved filter in near the door section of your tumble dryer. It collect excess lint and fluff and prevents your dryer from becoming blocked up. An excessive build-up of flammable lint can also cause a fire hazard.
eSpares could soon have your tumble dryer working with the benefits of a new lint & fluff filter, so you can be sure of getting a better drying performance - leaving you with nice dry clothes again!
Genuine spare part for select models of AEG, Arthur Martin, Faure, Electrolux, Tricity Bendix, Zanussi, Zanker and Zoppas tumble dryers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
Please Note: Filter does not require removing for cleaning, using a damp cloth will suffice - unnecessary removal could result in damage leading to a tricky refitting process.
5 Questions and 5 Answers
Do you attach upper and lower filters together first, and then try and squeeze them in. Really difficult without bending it. Or put either upper or lower one in first and then try to attach them in situ?
-
Chris at eSpares says...
We think you should fit the lower filter first then one end of the upper before squeezing in the other. If very tight warm the last filter in hot water to help it flex easier.
-
Chris at eSpares says...
Use a 'flat blade' like a blunt knife to carefully prise the filter out without damaging the surround.
How do i replace my new product. You have replied before to a similar question and mentioned it should just clip into place. It does not seem flexible enough for the lugs to clip , contact and fit. please advise. 1 Answer
-
Chris at eSpares says...
Try warming with a hair dryer to soften and flex into position.
having got all the fluff out from beneath the filter which we removed how do we get the filter back in place please? 1 Answer
-
Chris at eSpares says...
As long as the surround of the filter is clean this should simply clip in place. If it has become distorted then it may need replacing.
There's loads of fluff gathered below the filter that I can't get to, how do people clean this?
-
Chris at eSpares says...
The filter grills should prise out and using a crevice tool on your vacuum and a wire coat hanger you should be able to remove most of the detritus. Alternatively Stock Number: ES478317 is an attachment that may help get to this.
Will this part fit my appliance?
Check Now
