Whirlpool SBS200 Fridge Water Filter for S20DRBB32-A/G (858615815001) Stock Number: ES478549
Genuine spare part for select models of Whirlpool, Bauknecht and Maytag fridge freezers
Manufactured by Whirlpool
Will this part fit my Appliance?
Check this part fits your appliance
Whirlpool SBS200 Water Filter
Help maintain the taste and purity of the water in your fridge, with this replacement water filter from eSpares. Replacing the filter when needed is an important part of the care and maintenance of your fridge.
This spare water filter removes chlorine, heavy metals, cysts and dissolved organics. It fits beneath the door at the front of the refrigerator, behind the base grille. We could soon get you back to being able to enjoy great tasting water again in no time with this replacement spare.
Specifications:
- Type: SBS200
- Flow Rate: 1.9 lpm
- Operating Pressure: min 207 kPa (30 psi) / max 827 kPa (120 psi)
- Operating Temperature: min 0.6°C / max 37.8°C
- Capacity: 1500 litres
- Dimensions: approximately 5.5 cm x 26 cm
- Conforms to European Directive 1935/2004 ECC
- Whirlpool & Maytag recommend replacement every 6 months
Genuine spare part for select models of Whirlpool, Bauknecht and Maytag fridge freezers.
Please check the model fit list to ensure compatibility with your appliance.
5 Questions and 6 Answers
- Press and hold the menu button for a few seconds and it resets the indicator to 99% - will n ot do it on its own -still registers 0.1% even with new fiklter in!
-
Rory at eSpares says...
Hi Dave1 We at eSpares are not trained to give technical advice. Your best bet is to talk to your local Whirlpool or fridge specialist (or ask a friend or relative!) and they should be able to help you.
It isn't the short fat one as shown in video it's model UKF8001
-
Chris at eSpares says...
The rubber seal may have stuck making turning difficult. Turn of the supply and dispense any water in the system to remove any pressure and retry as this may help.
-
Chris at eSpares says...
This is part 481281729632 if the fixing is not shown we will need your model number of the appliance to try and identify it.
-
eSparesMalindi at eSpares says...
The price listed is one single water filter cartridge. They are sold singularly.
I have fitted the new filter and yes it was easy enough to fit. The F01% is still flashing and it should be showing f99% as it should be at maximum. Is there a reset button I should be pressing? tHANKS
- Had the same problem - press and hold the menu button and it resets the indictaor to 99% - doesn't do it on its own!
Will this part fit my appliance?
Check Now
