Ikea Dishwasher Detergent Dispenser Assembly Stock Number: ES478542
Genuine spare part for select models of AEG, Arthur Martin, Electrolux and Privileg dishwashers
Manufactured by AEG
(This part fits select Ikea models)
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Detergent Dispenser Assembly
If you’re finding that the detergent is not being dispensed into your dishwasher as usual, it may be due to a faulty dispenser. With this replacement part, you can effortlessly put your detergent tablets inside to guarantee your cutlery continues to come out as clean as possible on each cycle.
Genuine spare part for select models of AEG, Arthur Martin, Electrolux and Privileg dishwashers.
Please check that this is the right part for your model by checking the list of appliances before purchase.
14 Questions and 9 Answers
can you tell me how the release of the detergent dispenser is triggered. A replacement dispenser purchased from you is fitted and the operating solenoid energises when main switch is operated. 1 Answer
-
Chris at eSpares says...
The dispenser is powered from the control board. If the solenoid is continually energised when the power is turned on the control board is likely to be faulty and require replacing.
-
Chris at eSpares says...
The video attached to the part should help you understand how this is fitted on most dishwashers.
My AEG favorit dishwasher needs a new detergent dispenser.It is a semi integrated model so it has a wooden decor panel. How do I remove,if necessary, withot damaging the washer 1 Answer
-
Chris at eSpares says...
This should be in your installation instructions supplied with the dishwasher. Generally four screws are fitted to the inner edge of the door, once these are removed on some doors there are additional fixings that mean the panel then will slide a few millimetres and lift off.
we have recieved the correct replacement got the old one out without any probs but having probs with wiring.the instructions arenot very helpful.Any avice would be most helpful please!!!!
-
Chris at eSpares says...
The dispenser generally has only two electrical parts. The solenoid coil that is used to release the tablet draw, and the rinse aid level switch. If the switch was not connected it would still function the same but the control panel would have the rinse aid light would not indicate the rinse aid level.
-
Chris at eSpares says...
The only similar video we have to your appliance is linked from the part.
Will this part fit my appliance?
Check Now
