Get The App From Play Store!

Skip to main content
  • Over 4 million customers served

    UK based customer service team

  • Over 345,000 Reviews!

    Rated 4.7/5

  • 15 million parts delivered

    UK next working day delivery until 9:00PM

Dishwasher Recirculation Motor - 99W Stock Number: ES475341

5.0 out of 5 5.0 out of 5 (7 Reviews)

Dishwasher Recirculation Motor - 99W - ES475341
View video

5.0 out of 5 5.0 out of 5 (7 Reviews)

Genuine spare part suitable for select models of Whirlpool, AEG, Diplomat and Bauknecht dishwashers

Read more

Manufactured by Whirlpool

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Dishwasher Recirculation Motor Spray Pump

If you have noticed that the circulation of water in your dishwasher is not happening as is used to, eSpares might just be able to help! We have this replacement recirculation motor spray pump that could soon be yours.

The function of the recirculation pump is to send the water gathered at the bottom of the appliance, through to the spray arms, and so completing the wash cycle. Say goodbye to having to wash the dishes by hand - we can soon have you back to a fully working dishwasher again in no time!

Specification:

  • Type: Askoll
  • Model: M234
  • 99 Watts
  • 50Hz 
  • 0.45 amps
  • Voltage: 230-240

Genuine spare part suitable for select models of Whirlpool, AEG, Diplomat and Bauknecht dishwashers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Write a review

Here’s what other people are saying about Dishwasher Recirculation Motor - 99W.

(7 reviews)

5.0 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 4 out of 5
  • Anthony Cox Kent
    5.0 out of 5

    Easy to fit. 22 August 2020

    Motor was delivered well packaged with clips and wiring link supplied, easy to fit although I used jubilee clips instead of those supplied. Beware sharp edges on machine. Overall, well worth repairing rather than sourcing a new dishwasher.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • GraemeK Newcastle upon Tyne
    5.0 out of 5

    Clean dishes 24 December 2015

    Fast delivery. Item easy to install and far better quality than the original. Would recommend.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • BazHawkeye Shropshire
    5.0 out of 5

    Good product but not easy to fit. 07 October 2014

    This replacement for my Ignis dishwasher did what it said and my dishwasher is now like new with the washing capability. The problem was fitting in such a tight space. The Ignis casing is like a razor blade so there was plenty of blood about from the cuts to my hands. The hose connectors are of the crimping type and require a special tool. So its best if you buy ordinary jubilee clips before you start. You need a ratchet brace and socket to tighten these as there is no way you will get a screw driver into the confined space. The jubilee clips are slightly wider than the ones supplied so ensure they are fitted at the end of the rubber pipe where they fasten to the other pipe to ensure a good seal. Apart from that, not too bad and now I've done one I reckon I could halve the time I took.

    Ease of fitting 3.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
See all reviews
Ask a Question

5 Questions and 5 Answers

My dishwasher is not washing properly, at the end of the cycle it looks like the dishes have been 'steamed' rather than washed. from searches on the internet it points to the recirculation pump being at fault and this was apparently a weak point with the Askoll pump. I've stripped the pump off and before I buy another wanted to know how I can test it to make sure, it doesn't appear the same as some on various tutorials, the hose to the body is removable ie isn't bonded at one side and the impellor although it comes off the shaft it has a plastic and rubber drive under it as if it is meant to. The pump fitted is an Askoll M95.1 part number 461972474392, any help would be appreciated.

By Colin Robinson - Newcastle upon Tyne - 02 January 2016
  • Chris from eSpares
    Chris at eSpares says...

    For information to diagnose your problem see our video: How to Diagnose Draining and Motor Problems in a dishwasher: www.espares.co.uk/advice/3/1889

Answer this question

My dishwasher ADL 934 S 1WH, makes a grinding like noise whilst washing. The heater is fine, you can hear it spraying but the finished result is not always perfect, especially when a full load is tackled. Some plates are left with food deposits and not all cutlery is clean. It gets cleaned regularly with espares cleaners and I take the spray arms and filters our frequently to clean them.

By BazHawkeye - Shropshire - 18 September 2014
  • Chris from eSpares
    Chris at eSpares says...

    The first thing to say is there should be no food particles left as you should have rinsed these off prior to loading the machine. Dishwashers do not deal with food particles well as they are washed around and broken down. These can end up drying on plates leaving a crusty deposit. secondly insure the spray arms are not catching when fully loaded as this will prevent proper cleaning. The noise is unlikely to be effecting the performance.

Answer this question

Ignis dishwasher will nor go through the programme cycle it will fill up and drain but will not go through to full programme, element ia also working

By Macca - North West - 21 October 2013
  • Chris from eSpares
    Chris at eSpares says...

    It is common for the first cycle on a dish washer programme to be a cold rinse and if the appliance complete's this correctly it suggests a heat related problem. This could be the thermostat heater,sensor or even a control board problem.

Answer this question

Hi, Do you need any special tools etc to enable fitment of the spray motor and are there any instructions available - Thank You

By Anonymous - Essex - 27 August 2011
  • You need torx bits to take case to pieces, also cripping pliers to tighten and fixhose clips. No instructions supplied. Hope this helps. Maggie By Maggie - Worcestershire - 22 August 2012
Answer this question

On our machine it is sealed on to the pump unit but here it appears to be pushed on and held in place with a jubilee clip. it is only the rubber connector on our machine that is faulty - can this be purchased seperately as i do not need the pump/motor unit as well or the expense!

By Anonymous - Croydon Surrey - 24 February 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi there, I'm really sorry, but the hose part isn't available as a separate part! It's all manufactured as one part - really sorry.

Answer this question

Will this part fit my appliance?

Check Now

eSpares
4_7
See our reviews

Dishwasher Recirculation Motor - 99W

£103.62
(inc. VAT)
£103.62