Panasonic T170 25W Microwave Oven Bulb & Base for NNA770SBBPQ Stock Number: ES461903
Will this part fit my Appliance?
Check this part fits your appliance
T170 25W Microwave Oven Bulb & Base
Inject some much needed light into your microwave. If you have accidentally damaged the bulb base in your microwave, you've come to the right place. This replacement microwave oven lamp comes complete with integral socket, which will have you finally being able to see what you’re cooking again!
Specification:
- Type: T170
- Cap Fitting; Teg
- 25 Watts
- 240 Volts
- Colour: Clear
- Shape: Long
Genuine spare part to fit select models of Panasonic microwaves.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
8 Questions and 7 Answers
-
Chris at eSpares says...
To replace bulbs in most microwaves you would have to remove the cabinet, this could allow you to accidentally come into contact with the high voltage that is used to power the microwave. This could easily prove to be fatal and for this reason eSpares recommend that you do not remove the case unless you have been trained to work on microwaves.
-
Chris at eSpares says...
To replace bulbs in most microwaves you would have to remove the cabinet, this could allow you to accidentally come into contact with the high voltage that is used to power the microwave. This could easily prove to be fatal and for this reason eSpares recommend that you do not remove the case unless you have been trained to work on microwaves.
how do I remove old one, removed outside cover found lamp inside metal box. How do I get it out?
-
Chris at eSpares says...
The lamp holder is either fixed by a screw or clip and is removed by drawing the bulb and holder out away from the bulb.
-
Chris at eSpares says...
The operating instructions for this model was produced 28-Feb-2011 so this may give some idea of its age, although this may have been an update of an earlier book.
How do you replace the bulb
-
Rory at eSpares says...
Hi, to replace a microwave bulb, first you need to unscrew and remove the bulb cover. You then unscrew the bulb, and disconnect all the leads going in to it. You then reverse the steps to fit the new bulb. Always remember to make sure the microwave if switched off and unplugged from the mains supply first though, you don't want to electrocute yourself!
Will this part fit my appliance?
Check Now
