Hotpoint Washing Machine/Tumble Dryer Door Hinge Bearings - Pack of 2 Stock Number: ES187184
Will this part fit my Appliance?
Washing Machine/Tumble Dryer Door Hinge Bearings - Pack of 2
Opening or closing the door should not be a stuggle. With this hinge bearing, we could soon get you back in full control of your door.
Genuine spare part for select Creda, Hotpoint washing machines and tumble dryers.
Please check the model fit list to ensure compatibility with your appliance.
3 Questions and 4 Answers
To do so I need to remove at least one of the hinge bearings but they do not budge when trying to remove them.
Samara at eSpares says...
Make sure to check out our video on how to replace a hinge on a washing machine or tumble dryer: http://www.espares.co.uk/advice/tumble-dryers/a/9/1209/how-to-replace-a-washing-machine-door-hinge-a.html
- You need to split the door moulding first and then with a thin bladed screwdriver gently lift the bearing moulding off it's mounting spigot
Chris at eSpares says...
For information see our video: http://www.espares.co.uk/advice/7/1278/how-to-fit-a-washing-machine-door-handle
Model W100FW I've undone the screws that hold the bearings in and the screw by the door lock but can not seperate them. I've watched the video but it seems to be a different model.
- The outer cover is a snap fit on the inner cover, once the screws are removed the two halves need to be gently prised apart. Start at the hinge, it's not difficult, you don't need to completly seperate the halves, just enough to lift the hinge bearings off their plastic support posts, fit the new ones on the hinge and then fit into the door, you can't fit the hinge after the door halves have been fitted back together.