Belling Fan Oven Element - 2500W for XOU168 Mk2 Stock Number: ES167781
Spare part suitable for select models of Belling cookers
Manufactured by Original Quality Component
(This part fits select Belling models)
Will this part fit my Appliance?
Check this part fits your appliance
Fan Oven Element - 2500W
The function of the fan oven element is to heat the oven cavity. When the cooker knob is turned on for your electric cooker, electricity will flow to the element which then proceeds to heat up. Once the element reaches the desired temperature, the electricity flow switches on and off to maintain the temperature.
If the internal element filament burns out, this can cause the element to short circuit - and will lead it to fail. Potential signs that the element has blown can be visual things, such as a split, bulge, or blow hole on the element.
eSpares has the replacement fan oven element, that could soon be yours, to help get your fan oven back to the required temperature - so you can continue to make your delicious meals!
This top selling fan oven element consistently receives positive customer feedback about how easy it is to fit. Save money by fixing it yourself over hiring someone else to do it. Cooker & Hob how-to videos can be found here.
Specification:
- 2 Turns
- Wattage: 2500 Watts
- Height: 216mm
- Outer Diameter: 251mm
- Bracket: 68mm
- Tags: 38mm
- This circular oven element is fitted with two spade end connectors.
Spare part suitable for select models of Belling cookers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
6 Questions and 11 Answers
- Very easy. If you can operate a screwdriver you can do this!
- ever so easy to fit just note how you take old one out and do the reverse to fit
- easy to fit,quick service an easy job with parts supplied
- Yes it is - I fitted it into a Cannon 10450g it took 15 minutes and you only need a single medium philips screwdriver. I have since written a review elsewhere on this site with fixing instructions.
Do you have a video showing fitting to a Cannon Henley cooker - back plate has a light attached, so it's different from the Neff that you've shown.
- My Hotpoint oven also has a light in the backplate. Just unscrew the light cover and the back plate is then free. Good opportunity to clean the light cover.
- I have a Cannon Henley too, The bulb has a glass cover. You unscrew that then the rest is just like the video except its 45 degrees turned, and there are only 2 connection points rather than 3.
-
Rory at eSpares says...
Hi Bridgecoach, we're working on getting a lot more videos uploaded to the site and YouTube, however the actual shooting takes a lot of time - planning, shooting, editing - hiring a film crew isn't easy! So unfortunately we wouldn't be able to get a video up for you in the immediate future, however I have added to our video 'to-do' list.
i have a belling synergy with a 2500w in the top and a 2000w in the bottom.the bottom cooks far better than the top can i put a 2000w in the top
-
Chris at eSpares says...
If you can locate an element with the correct dimensions you should be able to fit it without problems.
I have a hotpoint EW81P
-
Caitlin at eSpares says...
Most likely the element yes. Take a look from the following list of elements that fit your model: http://www.espares.co.uk/parts/cookers-and-hobs/elements/hotpoint/ew81p/p/1595/808/0/433020
Fitted new element to main oven (Hotpoint BU82SS). All was well for three days, now it trips RCD after warming up (2 minutes). Fitted further 2 spare elements and the same thing happens. Works for a few days normal usage then trips RCD after 2 minutes heating up. Fan is turning OK and top oven works. Any thoughts?
- Is the fine earth filament still in tact, they are easy to snap and are the conectors at the back away from all other matallic parts (just a thought)
Will this part fit my appliance?
Check Now
