Over 4 million customers served
UK based customer service team
Washing Machine Door Interlock Stock Number: ES1665555
Genuine spare part for select models of Hotpoint and Indesit washing machines
Manufactured by Hotpoint
(This part fits select models)
Will this part fit my Appliance?
Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number? Here's how
Check this part fits your appliance
2. Enter your model number
Washing Machine Door Interlock
eSpares has this replacement interlock, that could soon be fitted to your washing machine. The door interlock is an electronic device that gives a 2 minute time delay once the wash/dry cycle has been completed - before you can then open the door. This will assist in preventing leaks.
Specification:
- Type: DK series
- DL.S2
- Bitron Dl. S2 Or Rold Dk Series DKS01
Genuine spare part for select models of Hotpoint and Indesit washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
-
London
Ask a Question
4 Questions and 4 Answers
On my machine there are no screws to hold on the door lock. Does it clip in, I can't see a way to take it off. Thanks
-
eSpares Staff at eSpares says...
On this type of machine, you would need to release the lock through the door seal, it would come out at an angle as it is clipped in.
Everything works on WMFY862P washing machine till when I close the door the fuse trips. Does this mean door lock is faulty 1 Answer
-
eSpares Staff at eSpares says...
It is unlikely to be the door lock causing it to blow, have a look at our advice centre www.espares.co.uk/advice/symptom/washing-machine-blowing-fuses just copy and paste into your browser.
My machine is displaying an FO6 error. The door closes but the key symbol flashes and the machine beeps. Which part do I need to solve this problem as there are two displayed on the website. The machine is a Hotpoint WMXTF 942 P UK 1 Answer
-
eSpares Staff at eSpares says...
Error code F on a Hotpoint washer refers to a door lock fault.
Hotpoint blows plug fuse after final cycles finished do you think door switch ? many thanks 1 Answer
-
Chris at eSpares says...
There was an issue of the motor on spin causing blowing fuses on some models. Select the high spin speed and retry, if the fuse blows again it may need a motor and PCB. Due to the high cost of replacing these items it is likely to be cheaper to have a 'fix price' repair from Repaircare.
Will this part fit my appliance?
Check Now
Good item re placebble 03 May 2022
Perfect item to replace the original was better to be free delivery