Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Cut To Size Universal Fridge Plexiglass Shelf Stock Number: ES1562230

4.2 out of 5 4.2 out of 5 (198 Reviews)

Cut To Size Universal Fridge Plexiglass Shelf - ES1562230

4.2 out of 5 4.2 out of 5 (198 Reviews)

Compatible cut to size plexiglass shelf suitable for most fridge freezers

Read more

Will this part fit my Appliance?

This product is compatible with:

  • Fridges & Freezers - Please Check The Dimensions In The Description

Cut To Size Universal Fridge Plexiglass Shelf

This universal spare is made out of plexiglass - so you can cut it to size yourself. If your current shelf has shattered or cracked, it is best to have it replaced, because it will be unsafe to use and store your items on - and over time it will only become weaker.

It's important to take note of the size (shown in the specification area below), as this will help determine whether this particular shelf is suitable for your fridge.

Specification:

  • Size(mm): 550 x 480 x 5
  • Cut To Size

Cutting Suggestions:

To cut this glass, use a fine tooth saw like a tenon saw or hacksaw. It can be brittle so go slow and do a trial cut on the 'waste' area. To remove the sharp edges use a file or sandpaper to smooth out the edges.

Compatible spare part suitable for most refrigerators.

PLEASE NOTE: Prior to the purchase of this item please check the dimensions to make sure this is the same size or slightly larger than your original shelf as it can be cut down. 

Write a review

Here’s what other people are saying about Cut To Size Universal Fridge Plexiglass Shelf.

(198 reviews)

4.2 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 4 out of 5
  • Cambridgeshire
    5.0 out of 5

    Great product, saved about £20.

    Tip for cutting on website invaluable, used a clamped batten as a guide. 5mm thickness larger than original glass but trims accomodated the plexiglass, with some gentle persuasion!

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Essex
    5.0 out of 5

    Good piece of kit

    Bought to replace a glass shelf, cut to size with jigsaw on slow speed & fine blade no problem if you take it very slow.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • Ireland
    5.0 out of 5

    Great purchase

    Looking for extra space in fridge and found this solution. Easy enough to cut to size. Depth is very good and the shelf holds a decent amount of weight.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

17 Questions and 19 Answers

By Anonymous - - 26 June 2014
  • Well believe it or not ..... I used all I had available A SAW ! Yep normal wood saw and it took me five mins . A couple of tips whilst your trying . Keep the saw as level as possible so cutting more across the length rather than into it and just go along with its OWN speed ! When you near the end take it slowly with NO pressure else it may crack , and its done . By Anonymous - Oxford - 11 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    Check some of the reviews, most seem to have success using a fine toothed saw.

Answer this question
By Mike - Haywards Heath - 20 July 2013
  • (I think the earlier answer may be for a different question!!) This plexiglass is plastic rather than true glass, and the intention is for you to cut the shelf to size. Measure and mark carefully, maybe applying something you can write on, preferably to the removable plastic film ('magic tape' or labels or decorators tape etc). Use either a fine-tooth saw or a jigsaw or a water-cooled diamond-wheel tile-cutting machine, then gently smooth off the cut edges, e.g. with a sanding block. Do NOT try score-and-snap, it doesn't work well on this material. If you could cope with a width of 273.5mm rather than 285mm, you'd just get 2 shelves out of this item. By Ron - Kingston area - 05 August 2014
  • Lloyd Handahu from eSpares
    Lloyd Handahu at eSpares says...

    Closely check whether the door is closing squarely to the cabinet. If not, the door hinges may be faulty. Try removing the door seal to determine whether the door closes further - if it does not this would indicate a fault with the hinges. Otherwise, you may need to replace the seal.

Answer this question
By Lt - Leeds - 20 February 2020
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    No, this plexiglass is not curved.

Answer this question

MY FREEZER BASKETS ARE BROKEN AND NOW DISCOUNTINUED, COULD THIS BE USED IN THE FREZZER SO THAT I COULD PUT PLASTIC CONTAINERS ON IT ?

By JOHN - yeovil - 25 January 2017
  • Parminder from eSpares
    Parminder at eSpares says...

    This wouldn't be suitable to hold the weight of freezer containers.

Answer this question
By MoQ - Leeds - 31 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question
See all questions and answers