Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Dyson Vacuum Cleaner Belts - Pack of 2 Stock Number: ES1540998

Dyson Vacuum Cleaner Belts - Pack of 2 - ES1540998
View video

4.5 out of 5 Rated 4.5 out of 5 (308 customers)

High quality spare part for select models of non-clutched Dyson models in the DC01, DC04, DC07 and DC14 ranges

Read more

Manufactured by Electruepart

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Will this part fit my Appliance?

This product is compatible with:

  • Dyson DC01 Vacuum Cleaners

High Quality Replacement Dyson Vacuum Cleaner Belts - Pack of 2

This pack of 2 non-genuine belts are compatible with non-clutched (without brush control) Dyson models in the DC01, DC04, DC07 and DC14 ranges.

If the agitator brush on your vacuum cleaner has stopped spinning it could be a problem with the belt. Grab thses replacement from eSpares to replace the worn out belt in your cleaner. Once fitted to your vacuum these belts will get your vacuum cleaner back to 100% so your carpets will be spotless again in no time at all!

Specification:

  • Type: DB/0001
  • Pack of 2 Agitator belt

Replacement spare part for select models of Dyson vacuum cleaners.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Here’s what other people are saying about Dyson Vacuum Cleaner Belts - Pack of 2.

(308 reviews)

4.5 out of 5

Ease of fitting 2 out of 5
Quality 5 out of 5
Value 5 out of 5
  • Hampshire
    5.0 out of 5

    Very good product

    The belt fitted and the video on espares web page on the fitting process was very helpful and easy to follow. Getting the belt over the motor spindle requires a bit of force (easily achieved using a screwdriver for leverage) and it is a bit fiddly to get the belt off the screwdriver shaft and onto the motor spindle, but the whole process only took a few minutes.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Aberdeen
    5.0 out of 5

    Very difficult to fit

    The product is fine but difficult to fit due to the poor design of the vacuum cleaner. You need very strong fingers and a small hand but the job can be done if you use two tools like screwdrivers - one to push and stretch the belt past the spindle and the second to twist the belt so that it can fit over the spindle. Not sure why the construction of the vacuum could not have been more user friendly.

    Ease of fitting 1.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Bolton, Lancashire.
    4.0 out of 5

    Good price.

    Product arrived on time and was packed well for delivery. Very tight and difficult to fit. Its not the belt the hover is difficult to access. On the whole pleased with product.

    Ease of fitting 2.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

4 Questions and 4 Answers

By c kirk - boise idaho 83704 usa - 29 August 2018
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    The belt is taken off the motor spindle at 1.10 in the video, we do not have a video specific to the DC14 at this time but the video should be similar.

Answer this question

The broken belt measures 35cm but the details of the replacement one says the length is 30cm.

By Anonymous - Belfast - 03 November 2014
  • Chris from eSpares
    Chris at eSpares says...

    We have four belts listed for your cleaner at: http://www.espares.co.uk/search/mt1pt1567/vacuum-cleaners/belts/dyson/dc01 Only one has a measurement and they all appear suitable. It is likely your old belt has stretched over time and all new belts are 30 cm in length.

Answer this question

What is the length and width of the belt please?

By Jon - UK - 06 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    Unfortunately we are unable to provide the dimensions of this part. The parts listed on our website are all model and serial number dependant (apart from universal parts). In order for us to locate the correct spares for your appliance we would need the model information requested. Without this we cannot guarantee that the part ordered will be the correct one for your appliance.

Answer this question
By Susie - Stratford Upon Avon - 03 August 2013
  • Chris from eSpares
    Chris at eSpares says...

    See our video for information: How to replace the clutch on a Dyson - DC04, DC07 & DC14

Answer this question
Order within 12AM for UK Next Day Delivery