Get The App From Play Store!

Skip to main content
  • Over 4 million customers served

    Part assist UK call centre

  • Over 304,000 Reviews!

    Rated 4.7/5

  • 15 million parts delivered

    Next day delivery until 9:00PM

Fan Oven Element - 1800W Stock Number: ES1504348

4.9 out of 5 4.9 out of 5 (583 Reviews)

Fan Oven Element - 1800W - ES1504348
View video

4.9 out of 5 4.9 out of 5 (583 Reviews)

Spare part suitable for select models of Arcelik, Beko, Blomberg, Grundig and other brands of ovens

Read more

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Fan Oven Element - 1800W

If food is undercooked in your oven, it may be due to a faulty fan oven element. This element is the circular element in the oven and can fail if the internal element filament burns out - causing a short circuit.

If this has happened to your element, or you have noticed visual signs of a split, bulge or blow hole on the element, then it sounds like it is time to get it replaced.

eSpares has this replacement fan oven element, which could soon be fitted in your oven to bring back the heat - and get you on your way to cooking those great tasting meals again in no time!


  • 2 Turns
  • Wattage: 1800W
  • 240 Volts
  • Height: 213 mm
  • Outer Diameter: 205 mm
  • Bracket: 70 mm
  • Tags: 24 mm

Please Note: This 1800W element has, in some instances, replaced previous elements that had a 2100W wattage.

Spare part suitable for select models of Arcelik, Beko, Blomberg, Grundig and other brands of ovens.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Write a review

Here’s what other people are saying about Fan Oven Element - 1800W.

(583 reviews)

4.9 out of 5

Ease of fitting 3 out of 5
Quality 5 out of 5
Value 5 out of 5
  • WD
    5.0 out of 5

    Saved me a lot of money 13 August 2021

    Our oven (cheap Beko) kept tripping a fuse when warming up, just the oven, grill worked OK. The video on espares helped. Took out the old element, no obvious visible faults but put in a new one and all worked lovely. Had to remove the back of the oven but this was 4 screws. All very simplle.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Jayne L Hampshire
    5.0 out of 5

    Replacement fan oven element 10 August 2021

    Bought to replace the element in my Lamona fan oven as it was starting to blow and very likely to stop working at any moment. My husband fitted it relatively easily although not quite as simple as shown in the video. Oven is working perfectly so very pleased with my purchase.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Helen Stoke
    5.0 out of 5

    Life saver 04 August 2021

    Not as easy to fit as video suggested but was fitted ok, and no more takeaways.

    Ease of fitting 2.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

19 Questions and 23 Answers

By Tomas - Bristol uk - 21 October 2013
  • I have had to remove the oven from the kitchen units as the element in my Lam 3400 oven is fixed /screwed from the rear.Had to remove the oven completely and take the rear panel off to get at the element fixing screws on the the rear side of the element. IS NOT REPLACEABLE FROM THE FRONT OF THE OVEN. By ALO - Edinburgh - 22 February 2020
  • Hi, I recently replaced the element in a BEKO OIF22300X oven, and it is indeed screwed in from the back with 2 screws. So, you have to remove the oven from housing, and remove the back panel of the oven, as well as the internal panel. You can access the screws & terminals through a hole in the metal casing & insulation layer. By jimbob046 - Cambridge - 29 January 2014
  • Chris from eSpares
    Chris at eSpares says...

    The manufacturers web site shows the cover over the fan and element is available separately so it must be removeable. Check it does not just lift off or it may be screwed from the back.

Answer this question
By jimmy - gateshead - 25 March 2016
  • I had this problem too. The main Earth Leakage Breaker (30mA) was tripping after the oven had been on for about 20 minutes. Strangely, when the trip was reset the oven would continue to work OK when hot. Replaced heating element and all OK thereafter. By CER1302 - Maidenhead - 19 July 2017
  • Chris from eSpares
    Chris at eSpares says...

    It is likely that the oven element is faulty but it is possible it could be another element.

Answer this question

It was making a loud rattling noise, this was fine although noisy as it was still heating up to the correct temperature but now it will not heat up. Although the grill is working fine. I changed the fan oven element approximately 2yrs ago. could this be the Fan motor and the element this time? Any help would be much appreciated

By Sarah Tizzard - Eastleigh - 19 January 2016
  • We had a similar issue recently on our OIF22300X, turns out the fan was catching on the heating element which was the noise, and a few weeks later the element blew. The fan may need tightening and the new element is relatively easy to fit (less than half an hour) although on this model you do need to remove the back panel to access the screws holding the element in. I am rubbish at DIY though and I managed it! By AC - Essex - 03 August 2016
  • Chris from eSpares
    Chris at eSpares says...

    If the fan is noisy it suggests worn bearings and may slow causing the element to overheat and eventually fail.

Answer this question

My Lamona 3400 fitted oven won't heat up. Everything else, fan, grill etc works so I assume it is the oven element? However when I remove the cover the screws appear to be coming in from the back. Do I need to take the oven out to get at it?

By Frank Hunter - Chichester - 02 February 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    You would normally be able to change this type of element from the front if the screws in the element go into the back cavity, if it is a bolt then the nut would be on the other side and the oven would need to be removed for the element to be replaced.

Answer this question
By BPB - kent - 30 January 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    you can replace the element from the front and we have a video which is similar that shows the procedure just copy and paste into your browser.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

See our reviews

Fan Oven Element - 1800W

(inc. VAT)