Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Flymo Lawnmower Switch 8A 250V Stock Number: ES1136941

Flymo Lawnmower Switch 8A 250V - ES1136941
View video

4.7 out of 5 Rated 4.7 out of 5(279 customers)

Genuine spare part for select Flymo appliances

Read more

Manufactured by Flymo

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Lawnmower Switch - 8A 250V

Your lawnmower's switch is an essential spare to have on your mower, without it your machine is rendered useless. Replace it with this cost effective, 8 Amp, 250 Volt spare from Flymo. You'll soon have that perfect lawn to enjoy when the sun shines. 


  • 8 Amps
  • 250 Volts

Please note: The switch housing is not included, but can be purchased separately.

This is a genuine Flymo spare part that has been made to fit the select lawnmowers and lawnrakes. Please check the list of appliances before purchase to ensure that this is the right part for your appliance.

Fitting Note: many customers have reported difficulty removing the wires from the old switch. 

It may be easier if you photo the old switch to identify where the wires are connected and break the old switch open to release them prior to transferring them.

Write a review

Here’s what other people are saying about Flymo Lawnmower Switch 8A 250V.

(279 reviews)

4.7 out of 5

Ease of fitting 4 out of 5
Quality 4 out of 5
Value 4 out of 5
  • essex
    5.0 out of 5

    switch for flymo

    Very quick delivery. A bit fiddly to fit especially the little yellow capacitor ( radio & tv suppressor.) But it did the job and saved the cost of a new mower.

    Ease of fitting 4.0 out of 5
    Quality 4.0 out of 5
    Value 4.0 out of 5
  • Dursley
    5.0 out of 5

    Saved Myself Another Load of Money

    The switch had given up on my lawn mower and I was expecting to fork out for a new mower but as usual espares came up with the goods. This time I didn't need the video to help fit the new part but in the past I've found them invaluable. Fitted the new switch this morning and cut the lawn straight away all thanks to espares.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • london
    5.0 out of 5

    Saves buying new mower

    Fairly easy to fit best to remove top cover on old switch to get to wires held in by spring clips. Ease out spring clips to release wires and capacitor

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

18 Questions and 20 Answers

By Anonymous - so18 5ft - 11 April 2014
  • In fact, they are just a very tight fit, especially if there is some damp corrosion around. Just get a good grip with long-nose pliers and lever them out against the body - a bit of 'post-hole wobbling' first doesn't hurt. By Baz - Leeds, England - 15 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    Other reviewers suggest breaking the old switch apart (take photo first to identify them).

Answer this question

Turbo Compact Vision 330

By Norfolkspur - Norfolk - 25 March 2010
  • Actually I found the best way to remove the two wires was to prise the back off the switch (doesn't matter if you wreck it). It is then a simple matter of removing the clips securing the wires and pulling them out intact. This way, there is no danger of damaging the solder tags on the ends of the wires, which are useful when refitting. To refit, simply push the wires into the appropriate holes in the new switch and they will latch. Same for the capacitor. By DS - London - 23 April 2013
  • The way I removed the wire from the old switch was to push a pin into the hole beside the wire and pull. The wires are held inside the switch by a simple spring mechanism! By AndytheB - West Midlands - 02 June 2010
Answer this question
By Paul - Skegness - 21 September 2016
  • Chris from eSpares
    Chris at eSpares says...

    The wire going to the power switch can break due to movement. Try moving this when the motor is running to see if it cause the cutting out and replace if required.

Answer this question

Which is the correct screwdriver to open up switch box for the flymo hover compact 300 ?

  • Parminder from eSpares
    Parminder at eSpares says...

    Sorry we do not have this information, however we would recommend taking a picture of the screw head to a local DIY store.

Answer this question

We have just bought the above switch for our Power Compact 400 and noticed that the existing switch has another little box on it. From reading reviews here it seems to be a capacitor. Do I need to buy a new one or can I use the existing one. The lawnmower just decided not to work when we tried to use it - no fuses blown, nothing else wrong with it. thanks

By Helen - United Kingdom - 03 August 2015
  • Chris from eSpares
    Chris at eSpares says...

    You can reuse the original. to remove push a small pin into the switch next to the capacitor wire to release it.

Answer this question
See all questions and answers
Order within 12AM for UK Next Day Delivery