Over 4 million customers served
UK based customer service team
Aquastop Fill Hose and Solenoid Valve Stock Number: ES1123937
Genuine spare part for select models of Bosch, Balay and Siemens dishwashers
Manufactured by Bosch
(This part fits select models)
Will this part fit my Appliance?
Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number? Here's how
Check this part fits your appliance
2. Enter your model number
Dishwasher Aquastop Fill Hose and Solenoid Valve
When your dishwasher is no longer working as it should and you have lost the confidence to use it, don't fret as eSpares is here to help! If you have identified a problem with the original fill hose, then this replacement can be fitted and bring your dishwasher back from the dead.
Genuine spare part for select models of Bosch, Balay and Siemens dishwashers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
Be the first to review this product
Ask a Question
5 Questions and 5 Answers
Hi. My Bosch SPV40C00GB/23 has stopped rotating the upper spray arms. I've cleaned everywhere and unblocked the drain. 1 Answer
Plenty of water pressure at the tap. Does the aquastop hose control water flow and could this be the problem or is it more likely to be the valve?
-
eSpares Staff at eSpares says...
You would need to test the valve with a multimeter to be sure it has failed but if you are not getting any water in then it is likely to be the valve.
If this is faulty on my dishwasher could it read as a check water E14 error code? On model SCE63M05GB/01 1 Answer
-
eSpares Staff at eSpares says...
Error code E14 does refer to a filling issue so to determine if the valve is faulty you would need to test it with a multimeter to show if it has failed.
dish washer slowly fills with water when not being used could it be i need to change this or could it be something else 1 Answer
so over a few days of not being used the dish washer fills with water causing flooding not sure if it the solenoid valve or something else
-
Dean at eSpares says...
Check the water pressure as it may be pushing the valve open when off, check if its dirty water that may be coming from the drain before suspecting the valve.
It looks like the fitting on the AquaStop fill pipe is not compatible to my standard blue cold fill fitting. Is there an adapter to join the 2??
-
Chris at eSpares says...
The hose tap connector should be the standard washing machine size. If it does not fit your tap you may need to contact a plumbers merchant for a thread ring adaptor to fit between your tap and a standard washing machine hose.
Will this part fit my appliance?
Check Now
