Siemens Tumble Dryer Thermal Limiter Regulator : ELTH, 2790093, 9000, 252806 Stock Number: ES111441
Genuine spare part for select Bosch, Neff & Siemens tumble dryers
Manufactured by Bosch
(This part fits select Siemens models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Thermal Limiter Regulator
The thermal limiter ensures your tumble dryer is always running safely by helping to prevent overheating. If the temperature limiter is faulty help restore your dryer back to optimum condition with this quality replacement from eSpares. Once fitted in place, you'll be back on track with a fully working dryer.
Genuine spare part for select models of Bosch, Neff and Siemens tumble dryers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
This is Bosch spares reference: 154166
13 Questions and 9 Answers
I have replaced the heater unit (with on board thermostat and temperature limiters) but still not drying fully, Checked the airflow etc. I cannot see this additional thermostat after removing all the covers - please advise where it is on the machine ? I now suspect the moisture sensor .The ENr # is TVR74103GB FD 8806 200287
-
eSpares Staff at eSpares says...
This thermostat is located in the front volute, the front cabinet would need to be removed to gain access, we also have a video to help www.youtube.com/watch?v=trJXdqNBn7M&t just copy and paste into your browser.
Bosch tumble dryer only just getting warm even with new element & rear thermostat assembly. I suspect the front ntc thermistor to be faulty, but it does show different resistance when hot/cold. What are the correct resistance values for this item, thanks
-
Chris at eSpares says...
We are sorry but do not have any information for this product.
Hi I have Bosch WTV74103gb/07, would you be able to tell me the location of this Thermostat on my appliance. Thanks
-
Chris at eSpares says...
Although listed on our system we cannot confirm this is fitted. It may be a replacement for the sensor at the bottom front of the machine.
Please could you advise if the thermostat is likely to be the problem with our Bosch Exxcel Tumble Dryer, (I have checked and this is the correct spare part for our model). It heats up and dries the clothes effectively but even on the "low heat" setting, it is very hot and has therefore been shrinking our clothes! We have been through your video clip on heating issues with tumble dryers and already cleaned and emptied out the filters and water containers. Thanks!
-
Chris at eSpares says...
Check your wash care labels to confirm that these clothes are OK for tumble drying. If the dryer is clear of blockages and vents OK then a new thermostat may improve this however you may still experience shrinking with some clothing.
The heating unit has been replaced but still does not heat up. I have removed the above thermostat and a test meter indicates it is open. What is the normal state of a good working thermostat? Before I purchase a new thermostat from you I want to confirm that I have identified the faulty part. Many thanks.
-
Chris at eSpares says...
This in my opinion looks more like a typical thermistor. If this is the case it could have a resistance of between 2000 ohms and 40,000 ohms. if you can read a resistance between these values it is likely to be correct. If it is a condenser dryer check that it does not have a float valve turning the heater off when the water is full.
Will this part fit my appliance?
Check Now
