Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

AEG Fan Oven Element - 2500W Stock Number: ES1080446

4.6 out of 5 4.6 out of 5 (84 Reviews)

AEG Fan Oven Element - 2500W - ES1080446
View video

4.6 out of 5 4.6 out of 5 (84 Reviews)

Genuine spare part for select models of AEG, Electrolux, John Lewis, Tricity Bendix and Zanussi ovens

Read more

Manufactured by Electrolux

(This part fits select AEG models)

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Fan Oven Element - 2500W

If the internal element filament burns out, this can cause the element to short circuit - and will lead it to fail. Potential signs that the element has blown can be visual things, such as a split, bulge, or blow hole on the element.

The function of the fan oven element is to heat the oven cavity. When the cooker knob is turned on for your electric cooker, electricity will flow to the element which then proceeds to heat up. Once the element reaches the desired temperature, the electricity flow switches on and off to maintain the temperature.

eSpares has the replacement fan oven element, that could soon be yours, to help get your fan oven back to the required temperature - so you can continue to make your delicious meals!

Specification:

  • 3 Turn
  • 2500 Watts
  • Height: 220 mm
  • Width: 192 mm
  • Bracket: 140 mm
  • Tags: 95 mm

Genuine spare part suitable for select models of AEG, Electrolux, John Lewis, Tricity Bendix and Zanussi ovens.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Write a review

Here’s what other people are saying about AEG Fan Oven Element - 2500W.

(84 reviews)

4.6 out of 5

Ease of fitting 4 out of 5
Quality 3 out of 5
Value 3 out of 5
  • Leeds
    5.0 out of 5

    my very first purchase

    web site easy to order,and delivery was spot on. took about 15 mins to fit,and i got top brownie points from my Mrs, for fixing the oven.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • Ipswich, Suffolk
    1.0 out of 5

    Poor performance and limited lifetime.

    This is the eighth element that I have fitted in the ten years we have owned this AEG cooker. They don't last long. Cheap or expensive they are all as bad as each other.

    Ease of fitting 4.0 out of 5
    Quality 1.0 out of 5
    Value 1.0 out of 5
  • Milton Keynes
    5.0 out of 5

    Genuine part at reasonable price.

    Opted for a geniune part after looking at generics. Glad I did. Came in manufacturers packaging. Fit within 10 minutes of receipt and works perfectly. Good product, reasonable price and prompt delivery.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
See all reviews
Ask a Question

4 Questions and 3 Answers

By Rjl - Somerset - 04 June 2017
  • Dean from eSpares
    Dean at eSpares says...

    Check the thermostat, switch and the fan itself for any signs of damage, you may need to meter the components to be sure what has failed.

Answer this question
By charlie - Ireland - 22 November 2013
  • Chris from eSpares
    Chris at eSpares says...

    The oven should have different thermostats for the top and bottom ovens and it would be unusual for both to fail at the same type. If yours is controlled 'electronically' it is likely to have a common control panel, this may be the cause.

Answer this question

My EOU43002X has tripped the electric a few times when you switch it on, then yesterday, It had been on for about 2 hours (cooking a roast) then all of a sudden the RCD tripped for all the sockets. I reset the RCD and everything looked fine, I went to check the Meat about 30 mins later and found that there was no heat in the Main oven. I'm assumming it's the element but wondered if it could be the thermostat instead. Any ideas would be good before I go buying lots of parts. The oven is only about 20 months old. The top oven/grill is still working fine.

By Anonymous - Somerset - 23 January 2011
  • Rory from eSpares
    Rory at eSpares says...

    Hi there. It sounds very much like something in the element shorted, and therefore caused the fuse to trip. I'd say it's most likely that you'll need to replace the element.

Answer this question

RCD tripped, but fan and light have stopped working as well. Top oven fine. Is it the element? Thanks Dave

By Woody - Leicester - 19 October 2013
Answer this question