Dishwasher Instantaneous Water Heating Element Stock Number: ES1065955
Genuine spare part for select models of Bosch, Neff and Siemens dishwashers
Manufactured by Bosch
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Instantaneous Water Heating Element
If you noticed the water in your dishwasher is not the usual warm temperature, then there could be a problem with the heating element. With this replacement instantaneous water heating element from eSpares, you could soon restore the water temperature and get great cleaning results with sparkling dishes and cutlery on every wash.
Specification:
- Aqua sensor
- Type: NTC
- Water distributor
Genuine spare part for select models of Bosch, Neff and Siemens dishwashers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
16 Questions and 14 Answers
Our dishwasher has blown the controller twice, the second time straight after having it replaced. Is it possible that the top rack motor has shorted the board. 1 Answer
It appears some triacs and transistors are blown out on the board.
-
eSpares Staff at eSpares says...
It is likely the heater can blow the board, you will need to test it with a meter to determine if it has failed.
Hi, our dishwasher works except that when the programmes are selected they now show a lot longer duration than they used to and when switched on never end. this is true except for the rinse cycle which works as normal. 1 Answer
Ive not felt the dishwasher getting warm at all.
-
Dean at eSpares says...
For information on this problem see our video: How to Diagnose Dishwasher leaking and heating problems www.espares.co.uk/advice/3/2083
Hi. is there an exploded view available showing the inside gear arrangement for the switch/control solenoid mounted on the underside of the element?(shown in black on picture) 1 Answer
Access to the inside to inspect for any damage is by removing 5 retaining screws.
-
Dean at eSpares says...
We do not have an exploded view as the part is supplied complete, if the element is not working it would need to be replaced.
-
Chris at eSpares says...
For information on this problem see our video: How to Diagnose Dishwasher leaking and heating problems www.espares.co.uk/advice/3/2083
Since replacing my water heater after it failed, it appears that the lower rack no longer washes but the top one works fine. Have I missed a connection? 1 Answer
-
Chris at eSpares says...
The motor on this assembly in the middle of the black section is used to turn off the top spray arm. check connections and motor continuity.
Will this part fit my appliance?
Check Now
