Hotpoint Dishwasher Heater Element Stock Number: ES1063008
Genuine spare part suitable for select models of Hotpoint and Indesit dishwashers
Manufactured by Indesit
(This part fits select Hotpoint models)
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Heater Element
If the water in your dishwasher is not producing a consistent temperature, it sounds like there could be a problem with the heating element. This element could soon be yours to help get that water temperature back to a consistently warm level - to help get your dishes and cutlery sparkling again in no time.
Help is at hand with eSpares as we have this replacement element from our range of dishwasher spares to help you get great cleaning results - which you have been used to.
Specifications:
- 31.8 OHM
- Includes: Seal
Genuine spare part suitable for select models of Hotpoint and Indesit dishwashers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
8 Questions and 9 Answers
I have a Hotpoint FDF784 showing error code A-8. Water barely gets warm. Heater element checks out ok on multimeter. I suspect thermostat/thermistor, but where is it located? Is it integral to the connection block of the heater unit? 2 Answers
- Thanks Chris (Couldnt see a way to reply to you direct) On further testing, ive found that the bimetal thermostat fitted to the heater module is not opening circuit when hot. I have had this connected to a continuity meter and heated the unit with a heat gun. I can hear the thermostat trip when hot, and likewise hear it click again when it cools, but the meter shows it remains a short circuit either way. I can physically force it open with a probe. With this in mind, would you suspect the heater unit in its entirety? Cheers
-
Chris at eSpares says...
A8 indicates the heat has not risen enough in the allowed time. Unfortunately if the heater is OK the problem is likely to be the control module Stock Number ES1329672
Bought from you Sunday on the website
-
eSpares Staff at eSpares says...
you will need to identify the error code first, we also have a video on diagnosing heating issues www.youtube.com/watch?v=7b1-M_WKYJs just copy and paste into your browser.
-
Dean at eSpares says...
We believe it is likely to be the element this video will help www.youtube.com/watch?v=7b1-M_WKYJs&t just copy and paste into your browser.
-
Chris at eSpares says...
Stock Number ES1639863 should be suitable for this part.
UPON REPLACING UNIT I SEE THAT THERE IS A PLUG WITH 2 RED WIRES ATTACHED BUT CANNOT SEE WHERE IT FITS I DO NOT KNOW WHETHER I ACCIDENTLY UNPLUGGED IT OR IFF IT WAS NOT CONNECTED IN THE FIRST PLACE CAN YOU PLEASE ADVISE yours Fred Wright 1 Answer
-
Chris at eSpares says...
There should be a two pin connection to the socket on the right side of the middle image. If this is connected the 'extra' plug may be fitted to a float switch in the bottom of the cabinet.
Will this part fit my appliance?
Check Now
