Ariston Washing Machine Rear Spider Drum Bearing for AWD12SUK Stock Number: ES104041
Will this part fit my Appliance?
Washing Machine Rear Spider Drum Bearing
If you’re noticing crunching noises during your wash cycle, this may be due to the grinding of bearings inside the washer drum. With the help of eSpares and this bearing set, you could soon be on your way to a fully working washing machine. Carry on washing those clothes with confidence!
Genuine spare part for select Ariston, Creda, Hotpoint, Indesit and New World washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
4 Questions and 5 Answers
Drum Bearing for Indesit 1239T SG 2 Answers
I require the bearing, but, I have looked on other sites and they have indicated that I will need and INNER BEARING and an OUTER BEARING. I am a little confused, could you help me please. Thanks in advance,
- I have a Ariston A1635 washing machine, behind the drum there is a 'spider' cast iron frame, the core of this frame has two bearings, outer and inner, on my unit the inner (drum rear bearing) was worn, after replacing this the grinding noise has now gone, if you have a spider on the rear of unit mark the position before removal, hope this helps..
- The drum spins on 2 bearings (sometimes called front and rear) with a seal to keep out the water. Considering the amount of work to get to the bearings you are better off replacing both and the seal. Probably you can buy them as a set.
Hotpoint AQXXF 149 PI bearings 1 Answer
I can not find bearings for my washing machine anywhere do you know why or where can I find?
Chris at eSpares says...
Bearings cannot be replaced in your drum as it is welded together and cannot be dismantled and re sealed. The only repair for bearings on your model is Stock Number: ES836333
Rory at eSpares says...
Hi ringo, replacing washing machine bearings is a really tough job. I'd only recommend trying it if you consider yourself highly competent in repairs such as this. You have to remove all the panels of the machine as well as the front, and get access to the drum. Best of luck if you go for it.
Indesit WIL134S Drum Bearings 1 Answer
How easy is it to replace the drum bearings
eSparesMalindi at eSpares says...
Drum bearings can be hard to install and we would recommend they are installed for you by a technician. Please also re-check your model details as this model number does not seem to come up on our systems as an Indesit appliance.