Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Tumble Dryer Polyvee Pulley Drive Belt - 1894 H7 Stock Number: ES101611

Tumble Dryer Polyvee Pulley Drive Belt - 1894 H7 - ES101611
View video

4.8 out of 5 Rated 4.8 out of 5(60 customers)

Spare part for select Creda, Crusader, Electra, English Electric, Hotpoint, Jackson & Parnall models.

Read more

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Tumble Dryer Polyvee Pulley Drive Belt - 1894 H7

Has the belt on your tumble dryer snapped, or has it been worn and loose over time? eSpares could have the answer right here with this replacement drive belt. You will soon have your tumble dryer back in full working order, and on the road to having your clothes fresh and dry ready for you to wear.

This can also be known as Pulley Belt, Motor Belt, Drum Belt, Fan Belt.


  • Type: Poly-vee belt
  • Section: H7
  • Length: 1894mm

Spare part suitable for select models of Creda, Crusader, Electra, English Electric, Hotpoint, Jackson & Parnall tumble dryers.

Please note: for certain models this part is date code dependent, the date code is the first 2 digits of the serial number. Please check that your model and date code are listed under the list of appliances to ensure that this is the correct part for your tumble dryer.

Write a review

Here’s what other people are saying about Tumble Dryer Polyvee Pulley Drive Belt - 1894 H7.

(60 reviews)

4.8 out of 5

Ease of fitting 2 out of 5
Quality 4 out of 5
Value 4 out of 5
  • home
    4.0 out of 5

    correct belt for Hotpoint TL22P tumble Dryer

    The belt is difficult to fit as there is no obvious way to remove the top Switch Panel. The belt has to be replaced over the drum, over two tensioner wheels and onto the drive spindle This would be much easier from the front if the switch panel was removed allowing the front panel and door to be taken off. None of the videos shows how to remove the switch panel on this machine which covers the screws holding the door panel in place. Replacing the belt can be done from the side but the top screws holding the panel are inside the switch panel and hold the top in position. It requires forcing the side panel wide enough to access the tensioner assembly. Once fitted the belt works perfectly and the dryer is now functioning correctly.

    Ease of fitting 2.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Malta
    5.0 out of 5

    Very good spare parts web site.Recommended

    Very prompt delivery. Fantastic seller and have very good service.

    Ease of fitting 3.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • chelmsford
    4.0 out of 5

    Not so easy if you read the 'Bosch' recommended 'How to do it'

    Creda 37645E. Remove lid. Do not remove the front panel! Remove rear cover to see wiring. Remove the rear & lower fixings of both side panels. they can be pulled back to see what to do. cannot remove due to rivets. Tilt back the rear panel (check wiring) to allow space to re-fit belt through space created at front of drum. 2nd person useful! & may have to remove some screws to the lower panel. Re-fit belt to motor spindle. Remove one tensioner & re-fit spring joining the 2 tensioners. Now re-mount the tensioner and force belt into position. Not easy as you cannot see what you are doing. Easier to do the tensioner at the vent tube side, Remove tube for better access. Re-fit everything , its not easy & is very fiddly. Best of luck. Watch some of the other creda videos as these give some clues as to what to expect etc.

    Ease of fitting 2.0 out of 5
    Quality 4.0 out of 5
    Value 3.0 out of 5
See all reviews
Ask a Question

18 Questions and 17 Answers

By T E S - suffolk - 09 May 2016
  • Kas from eSpares
    Kas at eSpares says...

    Unfortunately we do not have such information to provide. The parts listed on our website are all model and serial number dependant (apart from universal parts). In order for us to locate the correct spares for your appliance we would need the model information requested. Without this we cannot guarantee that the part will be the correct one for your appliance.

Answer this question

Should it be smoother side up or down? Thanks. T

By T - Belfast - 18 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    The ridged side of the belt will normally be fitted to match the ridges on the motor spindle.

Answer this question

belt no 610136- canvas backed rubber belt matching 3 grooves on the pulley wheel

By G - United Kingdom - 01 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    To source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: Alternatively please copy and paste this link into your web browser.

Answer this question
By BEN - northern ireland - 01 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    The closest video to your repair is likely to be: How to replace the shaft and bearings on a tumble dryer 642846neff Although this is a bearing replacement it also involves removing and refitting the drum and belt.

Answer this question
See all questions and answers
Order within 9PM for UK Next Day Delivery