Indesit Tumble Dryer Drum Shaft Kit for G84VNL Stock Number: ES101580
Genuine spare part for select Ariston, Creda, Hotpoint and Indesit tumble dryers
Manufactured by Hotpoint
(This part fits select Indesit models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Drum Shaft Kit
If your tumble dryer is making loud noises when spinning it could be due to a worn drum shaft. However, the problem need not continue - eSpares can offer you this genuine replacement to help fix your dilemma and get your dryer back to performing at its best. You could soon be on the way to a fully working tumble dryer - and on the way to nice dry clothes in no time.
Includes:
- 3 x Torx Screws
- 1 x Rear Bearing
- 1 x Drum Shaft Support
- 1 x Drive Pin
- 1 x Spacer Washer
- 1 x Square Rear Bearing
We recommend the purchase of a star head screwdriver kit with this part.
Genuine spare part for select Ariston, Creda, Hotpoint and Indesit tumble dryers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
6 Questions and 5 Answers
-
Chris at eSpares says...
Yes, it is shown in one of the other images on the part.
There doesn't seem to be a "grinding noise" as though there is a problem with drum bearings or similar issue. The drum doesn't seem to have any "play" in it when turning. Any advice would be most appreciated.
-
Chris at eSpares says...
Remove the cap of the bearing at the back of the machine where you are likely to find a lot of black dust and the bearing worn. See the attached video on how to do this.
I need a drum shaft/bearing for indiset is60v(UK) Regards
-
Chris at eSpares says...
The correct kit for your drum should be Stock Number: ES1672507
-
Christopher at eSpares says...
The problem is almost certainly the bronze bearings worn (remove the small cover at the rear to access) these wear leaving a black graphite type powder. It is a good idea to replace all the parts in the kit as these are the main wearing components.
My hotpoint condenser dryer makes a grinding noise when working, what might be causing this? 1 Answer
-
Chris at eSpares says...
It is likely that the rear bearing or the belt pulley will be worn and require replacement.
Will this part fit my appliance?
Check Now
