Answer this Question (3 Answers)

• I think the first line of the first answer above should be altered to "... take the black rubbery collar off the driver first ...". By MP - Edinburgh - 27 January 2017
• I've used it. take the black rubbery collar of the driver first, and any bit. Look in the angel attachment and see the 2 location springs, hold the attachment in one hand and pull the collar forward and slide the driver in to locate the springs. The > < marks on the attachment should be top and bottom of the driver. When together if you have your hand over the attachment pull the collar in and rotate until it locks in the position you want. Rotate until the > < marks are to and bottom and it will drop off. By N J - Gloucestershire - 27 June 2016
• 

  Chris at eSpares says...

  We think the attachment has a collar that if pulled towards the tool tip will allow the attachment to fit onto the drill. Once the collar is released it should lock onto the drill.