Smeg Dishwasher Error Code E07
You will no doubt agree that your dishwasher is an integral part of your everyday life, as it helps you night after night with the dirty dishes after you have eaten your delicious dinners of an evening.
Is your dishwasher showing an E07 error code and causing a meltdown from the thought of having to do the dishes in the sink again?
Well, you don’t need to stress as here at eSpares we may be able to help you out with a diagnosis plan.
Usually, this error develops when there is a problem with the flow meter, causing your dishwasher's performance to deteriorate.
Flow Meter
The flow meter is fitted in either the water inlet pipe immediately after the water inlet valve or the chamber on the left side of the cavity.
Usually, a fan is turned by the water with a magnet attached, which is sensed by a reed relay to check the amount of water which has entered the machine.
Safety First! Please ensure that you have disconnected the appliance from the mains before starting any repair.
- To access the flow switch, remove the top lid and the left side outer panel. Depending on your model the flow sensor may be in the pipe after the water inlet valve or the plastic chamber on the side.
- Inspect the flow switch for any signs of corrosion that may have caused damage.
If you have done the above, with no sign of damage found, you can replace the flow meter today with the help of eSpares.
With the help of eSpares, you can soon be back to a fully working dishwasher again soon - so you can say goodbye to needing to wash the dishes by hand.