Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Bosch Dishwasher E07 Error Code

To guarantee gleaming and hygienic dishes day in and day out a working dishwasher is a must for any household. Cleaning a lot of dishes and cutlery is really what a dishwasher is all about, whilst providing you with the benefit of not having to do the washing up manually!

If your dishwasher is flashing with an error code E07 on the control panel display it will be a serious cause of an unwanted headache.

However, no need to panic just yet - our article below will get you out of this dilemma and hopefully see you on your way to repairing it yourself so that your dishwasher is restored back to working order once again.

Cause 1

Dryer Fan

If your Bosch dishwasher is greeting you with an E07 error code it is likely to be a problem with the dryer fan. The fan is intended to circulate warm air, (on some models) after the rinse cycle to help dry your dining ware.

To help diagnose the fault see our simple to follow steps which can assist you in identifying the problem.

Safety First! Please ensure that you have disconnected the appliance from the mains before starting any repair.

  • The fan is usually found at the base of the machine, so be sure to disconnect any water pipes to avoid any mishaps.
  • Begin by removing the lid and the left-hand side panel.
  • With the panels off - reach under the cavity where you should be able to access the fan.
  • Once you’ve removed the fan check it turns freely and the motor shows resistance when checked with a multimeter.

If you need a replacement just browse our extensive range of Bosch dishwasher spares to help find the part required to get your appliance working like new.