Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

How to Replace the Hose on a Dyson - DC04

Over time the hose on your vacuum cleaner can come under a lot of strain due to constant pulling and tugging. Has your vacuum cleaners hose split, leaving you with poor suction? If so, eSpares can help with replacing your defective hose.

Follow our easy two step guide on how easily you can fix your vacuum cleaner performance and help you bring your vacuum back into full working order.

This video shows an example on how to remove or replace the part on a typical machine, some models may be different but the procedure should be similar.

  What You Will Need:

  Step 1 - Safety Advice

Safety First! Please ensure that you have disconnected the appliance from the mains before starting any repair.

  Step 2 -  Replacing Hose

Now the hose on the Dyson DC04 really is so easy to replace, it will take you about 30 seconds. All you need to do is remove the wand by unclipping off the hose, and then simply click the other end out of the vacuum base.

With the new hose, just click it in place in reverse and there you go, hose replaced.

It’s simple as that…with the hose assembly replaced on your Dyson, you can now get back hovering your home without the vacuum struggling to clean up the dirt off your floors.

If you need any advice regarding repairs to your appliances at home, eSpares provide many helpful advice articles in our advice centre.


Print Article Print this article