Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

How to Replace a Beko Tumble Dryer Heater (DCU series models)

If your machine is making all the usual noises during the drying cycle, but you notice there's no heat coming from the machine it may well be that the heater has failed and it needs replacing

There are three main reasons why the heater may fail on a tumble dryer. 

  1. The filter may be blocked and needs emptying.
  2. The condenser may be blocked and need cleaning.
  3. If the drying cycle is interrupted, heat can still rise from the heater and the lack of air circulation can mean that the thermostat trips.

If you are experiencing an issue with your tumble dryer heater, you will be pleased to know that at least you have found yourself in the right place to solve the problem.

This video shows an example on how to remove or replace the part on Beko DCU models. Other models may be different but the procedure should be similar.

  What You Will Need:

  Step 1 - Switch off Your Appliance

Safety First! Please ensure that you have disconnected the appliance from the mains before starting any repair.

  Step 2 - Check the Thermostat On The Heater

Now before you go about replacing a heater you need to first of all check the thermostat on the heater.

If you can press the button in the centre, and you hear a click, that means it had tripped and is now reset - so there's no need to replace the heater. However if you press that button and you don't hear a click you'll likely need to replace the heater.

  Step 3 - Gain Access to the Heater

To access the heater you need to remove the heater cover and also the top of the appliance by undoing the screws. Before you remove the screws to the heater cover, it's worth pointing out there are different screws on the back - some screw into metal and some screw into plastic. It's essential that you put the screws back in the same position that you took them out from.

  Step 4 - Remove the Heater

Time for the main event now...let’s get that heater taken out! To remove the heater you first need to remove the cover that keeps the wiring in place for the heater.

To remove the cover you need to undo the screw at the top (Do be careful because some of these edges are very sharp) Once the cover is disconnected you can then simply detach the electrical connections.

With the cover released you will be able to pull the electrical connections through as well as the rubber grommet that holds them in place. Then it's simply a case of unscrewing the heater and lifting it off.

  Step 5 - Fit the New Heater

Here we go then - the moment you have been waiting for! You can then grab your new heater, hook it into position before putting the screws back in.

With your new heater in place you can then feed the electrical wires back through (making sure that the rubber grommet is firmly in position).

You can then reconnect your electrical connections before screwing the cover back into place making sure the hooks are in position as well.

With the heater now fully connected you can proceed to fit the heater cover (once again do just make sure you're putting the correct screws into the correct position on the heater cover)

  Step 6 - Attach the Top Panel

With the heater cover screwed into place, you have now reached the final stage of the process!  All that is left for you to do is to re-attach the top of the tumble dryer.

Well there you go, all finished now! Well done to you on learning how to successfully replace the heater on your DCU series Beko tumble dryer. With your hard work, along with a little help from eSpares, you will now hopefully have a fully working tumble dryer once again!

Your Tumble Dryer In Need Of Some Loving, Care & Attention?

If you really want to get the best performance from your tumble dryer, and better results for your clothes, then look no further than these energy saving tumble dryer balls - providing a natural, eco-friendly alternative to fabric softeners (ideal for delicate or sensitive skin). When placed in your tumble dryer their square tips compress and soften fabrics, reducing drying time by up to 25%.

Need A Heater For Your Tumble Dryer?

Fixing your tumble dryer Heater yourself can save you a lot of money compared to booking a repair or buying a new tumble dryer. Here at eSpares, we have a wide-range of replacement tumble dryer heaters for you to select from - so you can soon be on your way to repairing it yourself.

Now you can add tumble dryer heater replacement to your list of  DIY skills. Congratulations! If you need any other help for your appliances you can find more videos from Mat and the team at eSpares, who are always on hand with appliance repair advice in your time of need.


Print Article Print this article