Arthur Martin Dishwasher Lower Spray Arm Nozzle Stock Number: ES501334

Overall rating

• I H
  5.0 out of 5

  Good part 06 May 2016

  Perfect part video a great help would advise that the base is put in warm water first for a better fit.Price a bit high

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	3.0 out of 5

• Bri. near Southampton
  2.0 out of 5

  Very Expensive for what it is. 14 May 2014

  This item is a nightmare and not for anyone not technically savvy, it has to be cut to fit! I bought 2 as both old nozzles had dropped off, what I didn't realise until I had cut both that one fitting into the spray arm was different with 2 vees. A very expensive buy and nowhere could I find second nozzle type on e-spares site.

  Ease of fitting	1.0 out of 5
  Quality	3.0 out of 5
  Value	1.0 out of 5

• Tony Tiger UK
  4.0 out of 5

  Exactly what was required 14 May 2014

  Not the easiest instructions to fit but at least there were instructions!

  Response by Chris on 16 May 2014

  We have now changed the video on the [part to a more detailed one.

  Ease of fitting	3.0 out of 5
  Quality	4.0 out of 5
  Value	2.0 out of 5

• y solihull
  1.0 out of 5

  Frustration 14 March 2014

  Made the cut but cannot fit into spray arm.What is the secret ?.

  Response by Chris on 17 Mar 2014

  Check out the video attached to the part as many struggled with fitting this part.

  Ease of fitting	1.0 out of 5
  Quality	1.0 out of 5
  Value	1.0 out of 5

• Stanwym Norfolk
  5.0 out of 5

  Great product 09 January 2014

  Arrived promptly. This item was really easy to install. In those immortal words "does what it says on the tin"! Many thanks!

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• harrisonaard1 Shaftesbury
  3.0 out of 5

  Wha...!? 03 December 2013

  I expected the correct bit for the price, actually gold-plated and engraved with a Latin inscription - not a sub-10p one-piece-moulding which one needs to cut with a hacksaw and fettle with a craft knife to enable secure fixing. It does work though.

  Ease of fitting	3.0 out of 5
  Quality	3.0 out of 5
  Value	2.0 out of 5

• Shakassoc Walsall
  3.0 out of 5

  Hard to fit. Useless instructions. 01 December 2013

  Experienced considerable difficulty fitting this. It is supposed to separate into two parts as it is fitted, but they were fused together, with the moulding too thick to split. In the end I improvised with a Stanley knife. Very unsatisfactory quality. I needed it so couldn't use more time sending it back for replacement. The fitting instructions are terrible. Otherwise -- what can you say about a nozzle? It's a nozzle and it does a nozzle's job.

  Ease of fitting	1.0 out of 5
  Quality	3.0 out of 5
  Value	3.0 out of 5

• nicola Derbyshire
  4.0 out of 5

  fiddly 15 November 2013

  This little piece of plastic is quite expensive and would be better if you could buy in pairs but I suppose it's still cheaper than replacing the whole machine. It's very fiddly and had to be cut and filed before it fitted. Again for the price you wouldn't expect to have to do that. Once in they work perfectly.

  Ease of fitting	1.0 out of 5
  Quality	4.0 out of 5
  Value	2.0 out of 5

• Easy Manchester
  2.0 out of 5

  Expensive and confusing. 28 October 2013

  This small plastic component is expensive for what it is. It is a one piece plastic component which has to be cut in two. This is not clear at first but once it is found that it is impossible to fit it as supplied, then it takes some time to work out that a sharp knife is required to doctor the component to make it fit. A non-technical person may have a problem. Once fitted, it functions satisfactorily.

  Ease of fitting	2.0 out of 5
  Quality	4.0 out of 5
  Value	1.0 out of 5

• Prakash Bristol
  5.0 out of 5

  Does the job 22 October 2013

  Well, I assume it does, since I can't see inside the dishwasher when it's on! As others have said, the part is supplied in one piece and has to be cut using a junior hacksaw. After that, it's just a case of pushing the short piece into the arm itself, and then the longer piece into the short piece you've just inserted into the arm. Seems pricey for what appears to be a small bit of plastic but cheaper than replacing the washing machine!

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

Ratings-Only Reviews