Bosch Garden Shredder Insert Stock Number: ES1139215

Overall rating

• Spare parts customer hampshire
  5.0 out of 5

  great replacement 30 March 2021

  Product was delivered quickly, and was the correct part. Fitting was easy as it has lugs on the sides that align with notches on the body of the shredder. Very please.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• v nn5
  5.0 out of 5

  good replacement 01 March 2021

  well done e-spares for getting the shredder operational again

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• DB Chesterfield
  5.0 out of 5

  Satisfying job 28 January 2013

  This job involves the removal or slackening of screws with ‘security’ heads. I already had a set of ‘security’ screwdriver ‘bits’, which I had bought cheaply on the local market. No other special tools required. 1) Remove the 6 screws that hold the black upper housing cover in place. Easier to do this if whole shredder is turned upside down. 2) Turn shredder right way up & pull housing cover off. 3) Remove top 2 or 3 screws that hold the 2 sides of the green plastic chute together. Slacken off remaining screw(s). 4) Pull & hold the green plastic parts apart at the top & manipulate the old insert out. This is a difficult bit! Be careful not to break the green plastic. May help if you wedge the green plastic apart or have assistance. 5) Insert the new insert – reverse of previous step – again a bit difficult. Make sure that it is right way up & right way round! Insert has 1 lug in centre of 1 side & 2 lugs towards ends on other side. Ensure that these match up with corresponding cut-outs in metal rim. 6) Replace & re-tighten 4 screws in green plastic chute. 7) Replace housing cover. May not fit exactly at this point, if it has been distorted by use. Carefully turn whole shredder upside down & replace 6 screws, but DO NOT TIGHTEN COMPLETELY at this stage. 8) Turn shredder right way up. Gradually ease housing cover into correct position – its inner edge fits into a groove in top of insert. Gradually tighten screws in turn (have to do this with shredder right way up) until housing cover is securely in place & all screws are tight.

  Quality	5.0 out of 5
  Value	5.0 out of 5
  Ease of fitting	4.0 out of 5