Creda Main Oven Fan Motor Assembly for R561ER Stock Number: ES1029461

Overall rating

• JA Surrey
  3.0 out of 5

  Replacement Fan 02 November 2022

  Replaced Fan with no problems but the motor is noisy compared with old unit as not original part

  Ease of fitting	5.0 out of 5
  Quality	3.0 out of 5
  Value	4.0 out of 5

• Dave Somerset
  5.0 out of 5

  Easy to use website and efficient delivery 03 October 2021

  The fitting video was helpful although for a different cooker. Detailing the nut to fix the fan blade was left hand was really helpful. We have a Cannon double oven and the grill for the fan is a pressing in the back panel that has 3 tabs that have to be cut. I used a flat blade screwdriver and hammer. After fitting the fan which is simple enough the grill has to be rotated slightly and fixed with five self tapping screws which are not supplied but cheap enough to buy on the web.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• MM Easy Ayrshire
  3.0 out of 5

  EG1000GX - needs plate removed and washers to fit 10 August 2021

  Tried to fit this item to an EG1000GX since the Site said it was a direct replacement but the supplied backing plate would not fit into the recess. Removed the plate and the fan would rub against the internal cover since the spindle was too long. Had to pack it with washers on both sides which is not ideal but it did work.

  Ease of fitting	2.0 out of 5
  Quality	3.0 out of 5
  Value	4.0 out of 5

• John Notts
  4.0 out of 5

  Best for difficult to find spares 03 May 2021

  Our 15 yr old belling range cooker failed. Broken fan in the oven. Checked the dimensions from the product description, ordered, delivered next day, fitted a treat. Excellent service.

  Ease of fitting	4.0 out of 5
  Quality	4.0 out of 5
  Value	5.0 out of 5

• JA North Yorkshire
  5.0 out of 5

  Easy fix for old Hotpoint Nouvelle 6172 double oven 26 March 2021

  Ordered at 20:45, received 13 hours later - superb. Excellent value generic part purchased in an attempt to salvage parents old double oven. Helpful video online- I’m very much an amateur diyer but from opening the box to finishing the job only took 30 mins. The fan had stopped working in parents oven and they were about to Order a new oven , but for less than £20 it was worth trying this part to see if the oven could be repaired . It was an easy fit , slightly different location of terminals but made no difference. Really impressed.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• P.J. Co. Laois, Eire
  5.0 out of 5

  Did the job and cooker Tricity Bendix SB 460 fine again 23 January 2021

  I shortened the old screws by c. 5mm and all works lovely now. You could replace the old mountings of screws in oven, but it was easier to use the old screws when shortened.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Mike Griffiths Sutton Coldfield
  5.0 out of 5

  Excellent value 12 December 2020

  Not sure how long it will last but it's working fine now and well worth the effort. It fitted upside down in my application which would mean lengthening some wires but I chose to remove the 3 motor fixing screws, rotate the motor 180° and secure it with the 3 mounting screws through the plate and into the motor. Works a treat.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• S F W P France
  5.0 out of 5

  Great replacement 07 February 2020

  These fans weren’t the official replacement item that I was searching for but they did the job and all at an incredible price. I’d like to thank Fiona her help, will use the site again.

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• DCM Worcester
  5.0 out of 5

  Needs a heat protecting pad 31 December 2019

  Nothing wrong with the part. When fitting, I found that the three screws that hold it in place are accessed from the INSIDE of the oven BUT, you take the bottom of three screws OUT and leave the top 2 Screws in but loosened. The unit then slides upwards to release (Once it's out you'll see the way this works). Re-fitting the new part is simple, but make sure that you get the earth terminal where the earth lead can reach BEFORE tightening. My heat-shield pad disintegrated as I took it off to fit to the new unit, so buying a new heat pad is really importants. With the availability of parts like this, ordinary people can save hundreds of pounds if they can self fit or even if they need a QUALIFIED ELECTRICIAN to fit the part THEY BUY. (Recommended to use a qualified electrician ALWAYS). My 1 metre wide oven had a complex set of screws and bolts at the back to access the fan, so not for a DIY'er IMHO.

  Ease of fitting	4.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

• Brian Wilding Stafford
  5.0 out of 5

  Excellent product, excellent company 12 March 2019

  The fan on our oven was playing up, not turning, ordered a replacement watched how to video, part arrived very quickly and within an hour the fan was in and working beautifully saving me at least £50.00, great price, great firm to deal with, Brian

  Ease of fitting	5.0 out of 5
  Quality	5.0 out of 5
  Value	5.0 out of 5

Ratings-Only Reviews