Get The App From Play Store!

Skip to main content

Karcher Pressure Washer Suction Connection Stock Number: ES538459

Genuine spare part suitable for select models of Karcher pressure washers

Product Q&A

Ask a Question
By NigNB - - 11 February 2010
  • mine didnt, but easily removed from original connector and fitted AOK By Jim37 - Guildford - 27 May 2010
  • Nope - keep the old one By Cypressrod - Glasgow - 06 May 2010
  • no By therabbi - Aberdare - 12 April 2010
Answer this question

Can you please supply the filter part number as I do not have the original one. Is a filter required?

By hmr15 - - 27 April 2009
  • The filter comes with part number 8 in the diagram , I cant work out why but if you look at the photo of part 8 you can see it . I have removed it from 8 and fitted it to 10 as it was originally. By Tank - - 25 March 2011
  • You need to keep your old filter & "O" ring. By wez99 - Manchester area - 19 May 2009
Answer this question

I have a Karcher B102 pressure washer in need of a similar piece to the above picture. The item that I have has the number '5.063-984' on it. Will you have anything compatible, if not the correct part please? Regards, Gary

By whyanickname - - 21 April 2009
  • If the part you need is the one that connects to your garden hose this is the same part. I fitted this and is perfect. By mufc4ever - manchester - 16 May 2010
  • this is the part i used on the same machine.. read review before fitting By growingnik - london - 08 May 2009
Answer this question
By TreeGirl - - 29 March 2009
  • No filter - you need to keep it from your old part or order a new one By Cypressrod - Glasgow - 06 May 2010
  • You can take out the filter from the original suction connection, clean it. Then insert it in the new replacement By Matchless - Bristol - 30 March 2009
Answer this question

At present I have to bend the outlet hose within the KB4040 outer housing at the outlet connection from the assembly which is a side-on horizontal delivery. This does not seem good practice to me. Can you please advise if there is an adapter which I can use to convert the current setup to allow a vertical delivery or horizontal but not side-on within the outer housing?.

By Bill Smyth - Near Glasgow - 14 October 2010
  • Malindi from eSpares
    Malindi at eSpares says...

    Hi Bill, this part is not listed for your model of pressure washer. Please contact our call centre with your full model details for further assistance, hopefully we can then help you get the part you're looking for.

Answer this question

I need a part (similar to this) for my K4.99 M pressure washer. The number stamped on the original part is 9.036-705.0. Please confirm this is the correct part. Thanks

By Dilbert - - 20 April 2009
  • i can confirm this is a sutible replacement for the 9.036-705.0 part By mitford - - 22 May 2009
Answer this question

I think the model Number is something like "G10" and it has a honda engine with a manual choke.

By princes - - 04 January 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Princes In order to find the right part for your pressure washer I will need your full model number. For help finding your model number, refer to our handy guide here: http://www.espares.co.uk/findingmodelnumbers.aspx

Answer this question

Will this part fit my appliance?

Check Now

Pressure Washer Suction Connection

£5.75
(inc. VAT)
£5.75