Hoover Washing Machine Door Hinge Stock Number: ES187341
Genuine Hoover spare part that will fit select washing machines
I except you have to split the door to fit the hinge. Do I need any parts that fit inside the door.Eg seals ect 3 Answers
-
Rory at eSpares says...
Hi Greenspeed, we have a How-To video on fitting a washing machine door hinge in our Advice Centre. You can watch it here: http://www.espares.co.uk/advice/washing-machines/a/7/1209/how-to-replace-a-washing-machine-door-hinge-a.html
- No, I didn't need anything except large screwdriver to separate door into two bits. After removing screws, door will not fall apart. Use the screwdriver to prise door apart. You'll have a nervous moment or two but go for it - it will come apart will a bit of persuasion. Hinge can then be easily inserted, screws replaced and door rehung onto machine. (Special star screwdriver was required for screws - had similar in a drill bit set)
- No seals 5requiredr but check that the parts which hold the new hinge are in good condition.
Can you advise if the part I mention below will do the full job please - hoover 1300 special edition door hinge - see below? 2 Answers
door came away in my hand as the hinge literally sheered off - part is left on the door - main hinge on the machine. if I order a new one - will it fit in the door OK or do I need the door as well? Also could yu let me know the right one to buy as I can't see it on the list?
-
Rory at eSpares says...
Hi Uglyfishface, you'll need to find your machine's model number to find out whether this hinge fits - the number you quoted is the series number. Click the 'Here's how >>' link above for help. With regards to fitting the part, you should only need the hinge, as long as the door parts are still intact. Check out our video on how to fit a hinge here: http://www.espares.co.uk/advice/washing-machines/a/7/1209/how-to-replace-a-washing-machine-door-hinge-a.html
- the same thing happened to me, i bought this hinge - I identified the one i needed from the pics on the site, but you will probably need the part that goes inside the door as well. I only found this out when trying to fit the hinge so am back on the site looking for the part.
Hi thank you for the video, after taking the seal off I find I need new internal hinges/brackets as the external hinge has snapped off inside on of the internal brackets/hinge can you advise which part I need for this. Its a hoover Six Express 1300 WDM 130.
-
Chris at eSpares says...
Stock Number: ES545965 has the usual hinge parts that are required for your machine.
I brought a door hinge from you a couple of weeks ago for a SE234-80 and fitted it ok but after fitting the machine starts ok but after a while it stops and I was wondering if there are any sensors I need to look at
-
Chris at eSpares says...
There are no sensors in the door. See our video: How to diagnose washing machine control and program problems http://www.espares.co.uk/advice/7/1793/how-to-diagnose-washing-machine-control-and-program-problems
My door hinge and has broken as has what it connects to in the door. Does this hinge come with both parts? 1 Answer
-
Rory at eSpares says...
Hi floorflush, this hinge comes as pictured; without any additional parts. To find the other parts you're after simply search your washing machine's model number using the bar at the top of the page to list all parts available for it.
Can you confirm this part is correct for; Hoover washing machine Ultracare 1100 Thank you.
- it is the part for my machine, I can't comment for your machine as I don't know your model
Will this part fit my appliance?
Check Now