Karcher Pressure Washer Hose & Hand Gun Kit - 7.5m Stock Number: ES1331411
Genuine spare part for K2-K7 Karcher pressure washers
- To separate gun pipe from main body you just need to press the trigger as if you was spraying,then either at the same time or just after,you just pull back the connection and it will release from main body.. think it's a safety mechanism,, just not explained in manual book.
- This is almost impossible to do most of the time as the button is badly designed and in a difficult place to access while trying to pull out the gun. Pushing in the button does not automatically release the gun which has to be twisted out.
-
Chris at eSpares says...
The gun can be disconnected by pressing the small yellow button under the start of 'the barrel'.
- I use the lance i had on older handgun
- Yes you can attach vario or standard lance that you should have OR dirtblaster or brush - if you dont have a lance then ok for wetting a surface or watering plant ( watch the demo ) very useful & informative
- Screw your extension hose onto the machine then fit the quick connector on the other end of the extension and click in your new hose.
- Different connections
Pressure Karcher K2 was working well yesterday, but would not start when plugged in today? Checked plug and fuse: 1 Answer
Cannot work out what may be wrong; just would not come on today when plugged in: checked plug and fuse OK. What might it be. Worked well on patio yesterday for 1 hour.
-
eSpares Staff at eSpares says...
We have a video to help diagnose problems www.youtube.com/watch?v=afPHu9LrRbQ&t just copy and paste into your browser.
-
Dean at eSpares says...
Sounds like a connection problem, depending on your model it may have 2 types of connection, one is a push fit release and the other a screw type. Watch our Karcher videos for more help.
-
Dean at eSpares says...
The Karcher K5 may have 2 types of connection, one is a push fit release and the other a screw type. This hose & hand gun will fit both, I would recommend watching the video located on the part for more information.
Original Kärchers has a stiff plastic hose which is stubborn to work with. As a spare part an easier to work with rubber hose is available (for instance 4.440-872.0). Which type is included in this package?
-
Chris at eSpares says...
We believe this is a heavier synthetic hose that is less likely to fold and crease than the one provided on a K2 pressure washer.
Finding it very difficult to screw adapter on to my machine. Can't seem to get it on straight and can't get adapter to push down in order to release hose quickly! Any ideas anyone?
-
Chris at eSpares says...
If you have cross threaded the adapter when fitting take it off and put the washer on its back before retrying to fit it. If you cannot get it fitted correctly you may need to replace the outlet elbow as shown in our video: Replacing the inlet and outlet connectors on a Karcher pressure washer • www.espares.co.uk/advice/8/1166
Can I use the lance from my old k411A sealed unit hose/ handgun with the HK7.5 quick connect hose/handgun
-
Chris at eSpares says...
The quick connector gun and hose will accept the lances if they have the standard size Karcher bayonet connectors.
-
Kas at eSpares says...
Yes, the hose and gun can be replaced on your Karcher K411A and the selected product number ES1331411 is suitable for your model