Flymo Quicksilver Lawnmower Clutch Drive Cable

Fits the following models [?]

Click on your brand to see the model numbers this part fits.

• Excellent replacement part , not readily available anywhere else 27 September 2012

  • Overall Rating 5.0 out of 5
  • Ease of fitting 3.0 out of 5
  • Quality 5.0 out of 5
  • Value 5.0 out of 5

  By Anonymous - Strabane

  This was a great product , a bit fiddly to fit but an excellent replacement none the less , hard to find anywhere else, thankyou e-spares , working a treat

• Sovereign Lawn Mower - Replace Clutch Drive Cable 29 August 2012

  • Overall Rating 5.0 out of 5
  • Ease of fitting 2.0 out of 5
  • Quality 5.0 out of 5
  • Value 5.0 out of 5

  By Anonymous - Ilkley

  Not an easy task A) Empty petrol tank b) Remove drive belt cover c) Remove Blade and drive belt d) Remove bolt at either side of rear wheels and clutch assembly retaining spring. e) Drop clutch assembly from the casing to remove Old cable which is located on top of the Clutch Unit f) Remove Spring and Top section of cable from kawn mower handle. g) Pass cable through the metal casing (Out to In) h) Fit Cable through clutch lever mechanism on top of clutch assembly (Inner Cable) i) Ensure that outer cable is securely located in plastic retainer on top of the clutch assembly. i) Fit the inner and outer cable at the handle end j) Re fit drive belt and blade. k) Push the clutch assembly and wheels back into position ensuring that cable goes back the the case and fit locator. Tie wrap cable to handle l) Re fit wheel assembly bolts. m) Ensure that the Clutch assemble retaining spring is re fitted m) Re fit drive belt cover. n) Fill with petrol and test. Note - On my first try I had not secure the outer cable in the top of the clutch assembly properly which caused the clutch pulley to cut through the outer cable requiring a NEW CABLE !!!

• VERY FAST AND EFFICIENT SERVICE 15 July 2012

  • Overall Rating 4.0 out of 5
  • Ease of fitting 1.0 out of 5
  • Quality 4.0 out of 5
  • Value 5.0 out of 5

  By TOWIE - Southport

  The guy i spoke to was very helpful and the spares came very fast' The only problem is the design of the mower and the amout of work needed to replace the clutch cable.it also I feel enters the casing in the wrong place causeing a sharp bend just before the connection to the geaqrbox. Also i feel that the should also be some screw type adjustment on the cable like a push bike as the cable is slightly too long and needed the spring shortening to make a good drive connection

Read all reviews...

• Q Will you please advise as to what length this cable is? 0 Answers

  By Les - Louth - 02 August 2012

  Answer this question