Skip to main content

Call 0844 9777 888 (7p per min + any network access charge)

Creda Single Pole Oven Door Microswitch for 49712 Stock Number: ES836014

Creda Single Pole Oven Door Microswitch for 49712 - ES836014

4.8 out of 5 Rated 4.8 out of 5(17 customers)

Genuine spare part for select Ariston, Cannon, Creda, Hotpoint, Indesit, Jackson and Wrighton cookers

Read more

Manufactured by Indesit

(This part fits select Creda models)

Will this part fit my Appliance?

Yes

This part is compatible with Creda 49712 Cookers & Hobs.

Not what you're looking for?
See all parts for your appliance.

Single Pole Oven Door Microswitch

If you're having trouble with your oven door, this replacement microswitch could be just what you need! It's a genuine spare part for select Ariston, Cannon, Creda, Hotpoint, Indesit, Jackson and Wrighton cookers.

This is Indesit spares reference: C00117389

Write a review

Here’s what other people are saying about Creda Single Pole Oven Door Microswitch for 49712.

(17 reviews)

4.8 out of 5

Ease of fitting 5 out of 5
Quality 4 out of 5
Value 3 out of 5
  • Birmingham
    5.0 out of 5

    Great purchase

    My Cannon kendal cooker started playing up and then the oven stop getting hot.So i got a new element as the old one was looking very worn and we have had the cooker about 5 year and does get used everyday.I fitted the new element switched it on and nothing??? Then i remembered for a while before the problem some times you did have to give the door a little nudge to get to oven to work so thought i would check on espairs for a door switch.Had it in stock, ordered,fitted and oven came straight on and worked perfectly.part was easy to fit once you take the back and side panel off.been installed for a couple of weeks now and been working fine.would recommend.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Oxfordshire
    5.0 out of 5

    Good Quality but a bit overpriced

    Switch appears to be good quality (time will tell). Overpriced for what it is, but this seems to be the going rate on other sites as well. Switch was easy to fit once I had removed the built in oven then removed the side panel (Hotpoint).

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 2.0 out of 5
  • Nottingham
    4.0 out of 5

    An easy fix

    I used this to fix a Creda Contour oven. The fan and oven stopped working. The side panel of this oven comes off easily. The switch is easily replaced. However, on further investigation, the fault was slight corrosion on one of the spade terminals of the original switch. After replacement I checked the old one with a multimeter and it was fine once the terminals had been cleaned with a bit of wet and dry paper. It would not have taken long to check so I could have saved myself 16 quid for which is, as has been previously stated, a microswitch in a plastic box but it was still much cheaper than calling out a 'specialist.'

    Ease of fitting 5.0 out of 5
    Quality 4.0 out of 5
    Value 3.0 out of 5
See all reviews
Ask a Question

5 Questions and 4 Answers

I recently purchased a new lamp holder from yourselves because I changed the bulb & as I tightened the bulb it arked/sparked. May I say brilliant service, but since this has been replaced the fan will not turn off. The cooker itself seems to be working fine but need to turn main power of to stop the fan. Have you got any advise what part is now at fault. Many Thanks Paul & Su Bradford

By PDB - BS164SQ - 07 July 2017
  • Dean from eSpares
    Dean at eSpares says...

    Depending on the model there may be 2 fans in the oven, this may indicate a switch or thermostat issue, please refer to our video for more help www.youtube.com/watch?v=_lWk22-qvoI

Answer this question
By Noddy - Wales - 04 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    If the switch has Three connections as shown in the picture it is a two way switch. The two wires should be connected across the N O and COM connections as these will close when the door is closed to turn the light on. Fit between the N C and COM to light when the switch is not pressed.

Answer this question
By bill - - 01 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    It is usually necessary to remove the top and back panels to release the sides. The side panels may have additional screws through the door surround at the front that may also need removing.

Answer this question
By Anonymous - - 17 November 2013
  • Chris from eSpares
    Chris at eSpares says...

    It is necessary to remove the right side cover to access this switch. To remove the cover you may have to loosen the hob top and move it to one side.

Answer this question
Order within 9PM for UK Next Day Delivery