Skip to main content

Call eSpares 0844 9777 888 (7p per min + any network access charge)

Bosch Microwave Inner Glass Panel Stock Number: ES756938

Bosch Microwave Inner Glass Panel - ES756938

4.8 out of 5 Rated 4.8 out of 5(42 customers)

Genuine spare part for select Bosch, Neff and Siemens microwaves

Read more

Manufactured by Bosch

Will this part fit my Appliance?

Does it fit?
Need help finding your appliance model number?

Cracked glass panel posing a problem? Let eSpares provide a solution for you.

Genuine spare part for select Bosch, Neff and Siemens cookers/microwaves, please check the list of appliances prior to ordering to ensure this is the right part for you.

Write a review

Here’s what other people are saying about Bosch Microwave Inner Glass Panel.

(42 reviews)

4.8 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 4 out of 5
  • 5.0 out of 5

    Great service

    Easy to find the right part on espares web site and excellent service with fast delivery.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • Ramsgate
    5.0 out of 5

    Microwave inner glass panel

    Excellent service - part received within 24 hours. If you have some basic tools including a torx bit set, the job is straight forward - the number of screws to be be removed for the mesh and and securing plate is a bit tedious. I would advise that you tighten the screws gradually, in pairs, diagonally opposite, to ensure even pressure when securing the new glass.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Loughton, Essex
    5.0 out of 5

    Thought it would be impossible, it wasn't

    When the glass in the microwave shattered, we thought it was going to require an engineer to replace it. One order from eSpares later and I had a nice little project on my hands. Two screws to take the front of the door off. Two brackets off to take the door from the hinge. A couple of screws to remove the retaining plate, and then the middle piece of glass. Then about 24 screws to get the mesh assembly and the shattered glass out. Everything back together and voila.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 3.0 out of 5
See all reviews
Ask a Question

5 Questions and 4 Answers

The glass is held in by metal surround with no obvious screws - seems to be clamped in. Has serrated teeth the whole way around.

By Fran - Suffolk - 14 April 2016
  • Chris from eSpares
    Chris at eSpares says...

    The cover Stock Number: ES757465 has many clips around its edge that must be released to ease off. Carefully use a blunt knife to prise the edge away and slide old credit cards or similar to prevent it catching again as you work around releasing the clips.

Answer this question
By Ewan - - 20 February 2015
  • Chris from eSpares
    Chris at eSpares says...

    We do not have any information on fitting this part specifically however see some of our videos like: How to clean or replace the glass in an oven door - Smeg http://www.espares.co.uk/advice/1/1334 and How to repair an oven door http://www.espares.co.uk/advice/1/1151

Answer this question
By Jo - Heywood - 15 August 2014
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

gourmet microwave oven by bosch

By ray willstrop - escrick york - 03 January 2012
  • If your oven is the built-in microwave/oven there are two plastic screws on the inside of the door that need to be completely unscrewed, then with the door almost closed the outer glass door will lift up and off. Make sure the power is off at the wall. After this it is easier to unscrew the door hinges- one plate on either side on the body of the oven. the black inner metal cover around the broken glass comes off if you remove the plastic latches at the top of the door on the inside, then there are a load of screws around the inner plate that holds the glass that need to be undone. Make sure you remove all the little bits of glass after removing the main glass panel- it sit on a metal mesh- note which way round the mesh goes. I hoovered it all just to make sure all the glass bits were removed. there is a plastic seal the glass sits on- make sure it is in the groove. then just reverse the process- I took a photo of each phase just to check. Good luck! By Anonymous - London - 15 January 2012
Answer this question
By Anonymous - - 16 May 2011
Answer this question