Neff Microwave Inner Glass Panel

Fits the following models [?]

Click on your brand to see the model numbers this part fits.

• Exacly what I needed 22 March 2013

  • Overall Rating 5.0 out of 5
  • Ease of fitting 4.0 out of 5
  • Quality 5.0 out of 5
  • Value 5.0 out of 5

  By Anonymous

  Ordered Thursday morning arrived Friday morning and parents now back to having a working microwave again. Excellent and significantly cheaper than a call out.

• Great Service 16 October 2012

  • Overall Rating 5.0 out of 5
  • Ease of fitting 3.0 out of 5
  • Quality 5.0 out of 5
  • Value 5.0 out of 5

  By Anonymous - Leeds

  Screen Cracked on Sunday,Ordered Monday,arrived and fitted Tuesday.A bit fiddly but not that difficult. Particularly liked one hour delivery slot.

• Excellent service! 09 July 2012

  • Overall Rating 5.0 out of 5
  • Ease of fitting 5.0 out of 5
  • Quality 5.0 out of 5
  • Value 5.0 out of 5

  By Les the Gnome - Warrington, Cheshire

  Ordered on-line on Wed morning, arrived the following Monday morning. Excellent tip by "m" from London, to use Duck tape. Also a good tip to use electric screwdriver with Torx (star shaped) bit - I had 26 screws to remove! The rubber seal behind the glass was covered in crud but Mrs Gnome did an excellent job cleaning it... Would recommend great care taking off the mesh screening from behind the glass as a new one seems to cost a lot!

Read all reviews...

• Q how do i remove the door on my gourmet microwave oven so that i can replace the inner glass?thanks ray w 1 Answer

  gourmet microwave oven by bosch

  By ray willstrop - escrick york - 03 January 2012

  • A

    If your oven is the built-in microwave/oven there are two plastic screws on the inside of the door that need to be completely unscrewed, then with the door almost closed the outer glass door will lift up and off. Make sure the power is off at the wall. After this it is easier to unscrew the door hinges- one plate on either side on the body of the oven. the black inner metal cover around the broken glass comes off if you remove the plastic latches at the top of the door on the inside, then there are a load of screws around the inner plate that holds the glass that need to be undone. Make sure you remove all the little bits of glass after removing the main glass panel- it sit on a metal mesh- note which way round the mesh goes. I hoovered it all just to make sure all the glass bits were removed. there is a plastic seal the glass sits on- make sure it is in the groove. then just reverse the process- I took a photo of each phase just to check. Good luck!

    By Anonymous - London - 15 January 2012

  Answer this question

• Q dimensions for glass panel 0 Answers

  By Anonymous - 16 May 2011

  Answer this question