Skip to main content

Call eSpares 0844 9777 888 (7p per min + any network access charge)

Siemens Dishwasher Pump & Hose Sealing for SE20T593GB/04 Stock Number: ES733418

Siemens Dishwasher Pump & Hose Sealing for SE20T593GB/04 - ES733418
View video

4.9 out of 5 Rated 4.9 out of 5(8 customers)

Genuine spare part for select Bosch, Neff and Siemens dishwashers

Read more

Manufactured by Bosch

(This part fits select Siemens models)

Will this part fit my Appliance?

You can also check compatiblity with other Siemens Dishwashers below

Need help finding your appliance model number?

Yes

This part is compatible with Siemens SE20T593GB/04 Dishwashers.

Not what you're looking for?
See all parts for your appliance.

This seal fits between the pump and the hose on your dishwashers. This is a genuine Bosch Part for select Bosch, Neff and Siemens dishwashers.

This is Bosch spares reference: 171598

Write a review

Here’s what other people are saying about Siemens Dishwasher Pump & Hose Sealing for SE20T593GB/04.

(8 reviews)

4.9 out of 5

Ease of fitting 4 out of 5
Quality 5 out of 5
Value 4 out of 5
  • 5.0 out of 5

    Saved calling an engineer / the price of a new dishwasher

    This seal replaced old seal which was leaking - though could see no damage on old seal. Used washing-up liquid to lubricate inner and outer surfaces prior to insertion into sump and connection of the circulation pump to seal. Following connection there was no more leaking - very good value - saved calling an engineer / the price of a new dishwasher. Tips: initially the dishwasher was continuously pumping out, from the web found out that this was a sign that the base of the dishwasher contained leaked water which had activated the float switch - though continuously pumping there's no way for it to pump water out of the base, only stops more water reaching there. Using advice from web took dishwasher apart - the base of the dishwasher was partitioned so was useful to dry out all partitions then temporarily block gaps between partitions with bluetac - then run dishwasher with side panels removed - it's then easier to locate from which area of the dishwasher the leak is coming i.e. which partition of the base contains water and so located leak (dribble) from the seal between dishwasher sump and the main circulation pump. Don't forget to remove bluetac once finished.

    Ease of fitting 4.0 out of 5
    Quality 5.0 out of 5
    Value 4.0 out of 5
  • 5.0 out of 5

    Great service from start to finish

    Telephone assistance to verdict part was great and part arrived very quickly.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
  • Gwynedd
    5.0 out of 5

    Great purchase

    Ordered on a Sunday evening,fitted and repaired by Tuesday afternoon . Great - no more washing up.

    Ease of fitting 5.0 out of 5
    Quality 5.0 out of 5
    Value 5.0 out of 5
See all reviews
Ask a Question

2 Questions and 2 Answers

I have tried to get this seal out to see if it is same as this but it is well stuck. Is it glued or is there a trick to getting it out. I am wondering if it is so hard to get out, will I be able to fit the new one in?

By jkk1 - Ireland - 08 June 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Jkk1, this is the seal for between the pump and the hose - I'd try using a screwdriver or other blunt object to coax it out. Once removed, your new one will fit if your model is listed in the Model This Part Fits section above.

Answer this question

We have a Balay dishwasher in Spain and we are told that they are owned by Bosch and the dishwasher is identical to most Bosch units. This seal is located on the pump. I attach some photos for your assistance. The seal has following number highlighted on the rubber: EPDM 56000 10 632. The outside diameter varies from 64 - 66mm as it is tapered. inside diameter is 35mm but 25mm at end that attaches to pump. Width is 20.5mm. Thanks Mrs Owen

By Reuben - - 02 April 2009
  • Rory from eSpares
    Rory at eSpares says...

    Hi Reuben - as yours is a Spanish appliance, I'm afraid I can't make any guarantees as to whether a part will fit your model - we supply UK parts only. Sorry I couldn't have been more help.

Answer this question