QI strongly beleive that this is the correct fitting that i need but the broken bit is jamed in the other side and was wondering how i go about removing this as a screwdriver pushing it in will not budge it1 Answer
By Darron- NI
- 21 April 2015
Remove the lock from the front panel and you can turn the lock cam from the back to the unlock position and release the broken part while leaving the lock in the open position.
Qmy tumble door wont shut and it still works even when the door is open1 Answer
By Rosebud- Belfast
- 03 November 2014
It is likely the end of the loop of this part on the door has broken in the lock and stuck in the on position. If you cannot move the switch to the open position and remove the broken part it will be necessary to replace this part and the door lock.
Qtumble dryers well not stop with door open can some one help me pls1 Answer
hot point vtd20g
By viper- london
- 20 March 2014
It sounds like the door lock is faulty or stuck closed because this catch is broken. If the 'loop' on this part is broken then the lock is in the closed position. Replace this part and carefully use a small screwdriver to prise the broken 'bar' from the latch plate out of the lock to leave the catch in the open position.
If you cannot do this with out damaging the lock replace the lock as well.