Bosch Dispenser Tripping Device with Spring

Stock Number: ES546388

Manufactured by Bosch

In Stock Available for immediate despatch

Rated 4.8 out of 5 (173 customers)

Read all reviews Write a review

Main product image Enlarge icon enlarge image


Has the spring or tripping device on your dishwasher's dispenser unit given up the ghost? Replace it with this spare set from Bosch.

eSpares Tip: See the reviews and Q&A section for this product for excellent fitting tips from our customers.

This replacement tripping device is a genuine spare part for select Bosch, Neff and Siemens dishwashers. Please check the list of compatible appliances prior to ordering.

More product images

Product Reviews

Rated 4.8 out of 5 (173 customers)
Write a review
  • Excellent

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Edinburgh Scotland

    Spring arrived today watched video for 2 minutes fitted it in 10 seconds. Brilliant I am delighted. We have a functioning dishwasher again. Thank you
  • Good product - fits and works well - quickly and efficient supplied

    • 5.0 out of 5
    • 3.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Nottingham

    Overall a good experience in my first go it alone dishwasher repair. The relevant eSPARES Youtube clip was very helpful but be very careful when disengaging the old spindle from the trip mechanism. It is easy to break the spindle retaining features especially if they are old and thus brittle.
  • Easy to fit

    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5
    • 5.0 out of 5

    By - Northumberland

    My dishwasher is a Hotpoint Aquarius DWF30 with bosch motor etc so wasn't sure if this would fit. Needed only the spring but snapped the tripping device shortly after fitting spring so ended up using the whole lot. Bit awkward removing old trip but new one popped into place no prob and is working perfectly.

Ask & Answer

(6 Questions and 6 Answers) Ask a question
  • Q Bosch excel dishwasher fails to start! Time indicator not lighting up. 1 Answer

    I have checked the fuse at power supply in wall, there is power getting to On/Off switch on machine but don't know how to check where fault is .

    By M - Aberdeen - 30 June 2014

    • A
      If the power is definately at the switch but no lights on the board the problem is likely to be the board. For information on this problem see our diagnosis video

      By Chris eSpares Staff - 01 July 2014

  • Q Tripping device does not latch? 1 Answer

    We recently moved into a new property and have just purchased a broken soap dispenser door and fixed it ok (the latching lug was damaged) but have now discovered that the door still does not latch. What is the most likely cause and can it be easily fixed?

    By Nimpo - South coast - 31 January 2014

    • A
      Depending on what has broken this kit may resolve your problem but you may have to replace the whole dispenser.

      By Chris eSpares Staff - 04 February 2014

  • Q how do I fit the cam spindle 1 Answer

    Does the cam spindle just pull out and the new one push in as I am having trouble getting it out please can someone help

    By aberdonian - 28 November 2009

    • A
      split the the door front and cut the lug off the back of the spindle

      By matvan2007 - 29 March 2010

  • Q Additional details on fitting please? 1 Answer

    It's not clear to me whether you can fit this parts kit without dismantling the dispenser unit. Can you just remove the sliding soap cover and access the existing parts beneath it (if so, then what's the trick to remove the soap cover?) or will I need to remove the front door trim in order to access the rear of the soap dispenser? Thanks!

    By Huck - 12 October 2009

    • A
      you need to split the door front from the inside by removing the security screws then cut the lug off the tripping device with side cutters replace with new one ,refit door front and then fit the spring to the dispenser then attach the draw front

      By matvan2007 - 29 March 2010

  • Q Can I replace the cam spindle easily? 1 Answer

    I want to replace not only the spring but also the cam spindle itself since the interlocking of the lid (also being replaced) is effected by the sloping lugs on the lid and cam spindle arm and BOTH are worn, but it looks like the spindle has a locating spring groove at its lower end, which spring would be inside the main body. Is it possible to replace the spindle from the top just by pulling the old one out and pushing the new one in or does it need to be done by taking the whole dispenser unit to pieces ?

    By poppi - 21 September 2009

    • A
      Unfortunately we cannot give out technical advice. Please speak to the manufacturer directly or an engineer. Hopefully they will be able to help.

      By eSparesMalindi eSpares Staff - 04 June 2010