Karcher High Pressure Hose - 6M Stock Number: ES544736
Will this part fit my Appliance?
Does your pressure washer have a leaky or split hose? This is a cost effective replacement from Karcher to get you on your way to high pressure cleaning once more. It connects the main pressure washer machine to the trigger gun.
- Length: 6 metres
- 16 MPa
- 110 bar pressure
- For use with Karcher Quick Connect spray guns and accessories
Genuine spare part for select Karcher pressure washers - this hose only fits models where the washer's hose is secured to the trigger gun with a quick connection clip. Please see the list of compatible appliance models prior to purchase.
Please note: This spare is chassis number dependent. Please contact our Call Centre with this number (which looks something like this: 1.504-604.1) and we can advise if this spare is suitable.
10 Questions and 9 Answers
Would this fit model no K5.70MD? 1 Answer
Matt at eSpares says...
No. We don't currently list any spares for that particular model but if you can find the chassis number on the machine (should start with a 1.4 or 6.3) and get in contact with customer services they could help find a suitable hose for that machine.
Will thi fit the 520M 1 Answer
Matt at eSpares says...
You'll probably looking at the ES538245 high pressure hose for that model but best to double check with customer services (0844 375 3 375) to make sure it's the correct one and will fit your machine.
- The hose does detach you just need to keep the hose still and turn the thing that looks like a bottle top. When the replacement one comes you just do this in reverse to fit it. Good luck.
I am having great difficulty unscrewing the hose at the body of the machine. Any tips?
- Yes my model is a B202 and it is the same as a KB202.
How to fit this hose to 620M 1 Answer
Our 620M is about 15 years old. The replacement hose my wife ordered from you has arrived. The illustrations on the box indicate the new hose can be fitted by prising off the old one but this doesn't seem to work. Do I need to undo the srews holding the gun/lance together and if so do I need a special allen key? Help please!
- No need to undo any screws. On the side of the gun about 1cm from where the hose enters it there is slider plate with a small recess. Get a flat blade screwdriver in the recess and prize the slider plate out. This will release the hose. Remove it and insert the new hose. Push the slider plate back in and away you go.